88 ENSYSTEM CONNECTIONS
Connecting To A Satellite Receiver
Simple Connections

This is an example of a simple connection if your TV has one 21-pin AV input (SCART) connector.

Connect the satellite receiver to the L-2 IN/DECODER connector, then connect the L-1 IN/OUT connector to the TV’s connector.

NOTES:

●Set “L-2 SELECT” to “VIDEO” or “S-VIDEO”. ( pg. 83)

●You can use the Automatic Satellite Programme Recording function ( pg. 63) with this connection.

●To record a programme via the satellite receiver, select L-2 mode by pressing PR +/– so that “L-2” appears on the front display panel.

●For details, refer to the instruction manual of the satellite receiver.

Outdoor unit

Aerial

Aerial connector

 

 

Back of TV

Satellite cable

 

TV aerial cable

Satellite receiver

ANTENNA IN

ANTENNA OUT

21-pin SCART connector

Mains outlet

Back of unit

IMPORTANT:

When you set “L-2 SELECT” to “SAT VIDEO” or “SAT S-VIDEO” ( pg. 83, “L-2 Select Setting (L-2 SELECT)”), it is possible to view a satellite broadcast with the TV set to its AV mode even if the unit is turned off. When the unit is in Stop mode or recording, press on the remote control to turn off the VIDEO indicator on the unit.

●If you turn on the unit when the satellite receiver’s power is off, nothing appears on the TV screen. In this case, turn on the

satellite receiver, or set the TV to its TV mode, or press on the remote control to set the unit to the AV mode.