JVC DR-M10S 48 EN, To temporarily release Parental Lock, To change the settings, NOTE:, NOTE:, A Change the level, C Enter your password, B Enter your password, See

48 EN PLAYBACK OPERATIONS (cont.)

To change the settingsYou can change the Parental lock settings later.

Perform steps A to B of “To set Parental Lock for the first time” on page 47 to access the “PARENTAL LOCK” screen before continuing.

A Change the level.APress rt repeatedly to select “PARENTAL LEVEL”, then press ENTER.BPress rt repeatedly to select the desired level, then press ENTER.B Change the country code.APress rt repeatedly to select “COUNTRY CODE”, then press ENTER.BPress rtrepeatedly to select your country code, then

press ENTER.

●See “Country/Area Code List for Parental Lock” ( pg. 49).

C Enter your password.

Press the number keys to enter the same password as in step D of “To set Parental Lock for the first time”, then press ENTER.

D Complete the setting.

Press SET UP twice.

●The normal screen resumes.

NOTE:

If you forget your password, enter “8888” in step C.

To temporarily release Parental Lock

When you set the parental lock level strictly, some discs may not be played back at all. When you insert such a disc and try to play it back, the confirmation screen appears on the TV screen, asking you whether you want Parental Lock to be temporarily released or not.

A Access the password screen.APlace the disc on the disc tray.

●If the disc is rated higher than the selected level, the confirmation screen appears.

BPress w e to select “YES”, then press ENTER.● If you select “NO”, you cannot play back that disc.B Enter your password.

Press the number keys to enter the same password as in step D of “To set Parental Lock for the first time”, then press ENTER.

●When you enter the correct password, the Parental Lock is released and the unit starts playback.

●If you enter a wrong password, “ENTRY ERROR RETRY” appears on the TV screen. Enter the correct password.

●If you have successively entered wrong password three times, “ENTRY ERROR CAN NOT CHANGE PASSWORD” appears on the TV screen. In such a case, press ENTER. The disc will stop. Then play the disc again, and try the procedure again from step A.

NOTE:

If you forget your password, enter “8888” in step B.