EN 93

AUDIO OUTPUT

(The boldface settings in the table below indicate the settings at your purchase.)

8 DIGITAL AUDIO OUT

Set to the appropriate mode according to the type of the device connected to
DOLBY DIGITAL/PCM
DIGITAL OUT connector.
STREAM/PCM
DOLBY DIGITAL/PCM:
PCM ONLY
Select this when you connect the digital input connector of a Dolby

 

Digital decoder or an amplifier with a built-in Dolby Digital

 

decoder.

 

STREAM/PCM:

 

Select this when you connect the digital input connector of an

 

amplifier with a built-in DTS, Dolby Digital, or MPEG multichannel

 

decoder.

 

PCM ONLY:

 

Select this when you connect the linear PCM digital input of other

 

audio equipment (amplifier, MD or DAT deck, etc.).

 

 

8 ANALOG AUDIO OUT

Select the appropriate setting to accommodate the unit to the connected A/V
STEREO
equipment. This function takes effect when a DVD VIDEO disc is played back.
DOLBY SURROUND
STEREO:

 

Select this when listening to conventional two-channel stereo audio

 

with the unit’s AUDIO OUT connectors connected to a stereo

 

amplifier/receiver or TV set, or in case you want to record the audio

 

from a DVD VIDEO disc to a Mini Disc, etc.

 

DOLBY SURROUND:

 

Select this when listening to multichannel surround audio with the

 

unit’s AUDIO OUT connectors connected to an amplifier/receiver

 

with a built-in surround decoder or a surround decoder.

 

 

8 D. RANGE CONTROL

The dynamic range (the difference between the loudest sound and the quietest
NORMAL
one) can be compressed during playback of a programme encoded in Dolby
WIDE RANGE
Digital format.
TV MODE
This function takes effect when a DVD VIDEO disc recorded in Dolby Digital

 

format is played back at low or middle volume.

 

NORMAL:

 

Normally select this setting to activate this function.

 

WIDE RANGE:

 

Select this to deactivate this function when you enjoy wide dynamic

 

range programme.

 

TV MODE:

 

Select this when you hear the sound through the TV’s speaker(s).

 

NOTES:

 

● This function takes no effect on programmes other than that recorded in Dolby Digital

 

format.

 

● This function dose not work when Simulated Surround Effect is activated. ( pg. 44)

 

● The effect of “NORMAL” and “WIDE RANGE” may not be different depending on discs.

 

 

8 OUTPUT LEVEL

You can lower the output level of analog audio to accommodate the unit to the
STANDARD
connected A/V equipment.
LOW
STANDARD:

 

Normally select this setting.

 

LOW:

 

The output level of analog audio is lowered.