Manuals / Brands / TV and Video / DVD Player / JVC / TV and Video / DVD Player

JVC DR-M10S 16 EN, Basic Connections, ATTENTION:, B Install the unit, A Check the contents, INSTALLING YOUR NEW UNIT, C Connect the unit to a TV, OUT, The, cable, ANTENNA

1 116

Download 116 pages, 8.08 Mb

16 EN

INSTALLING YOUR NEW UNIT

Basic ConnectionsAerial connectorBack of TV

TV aerial	RF cable
cable	(provided)

21-pin SCART connector

21-pin SCART cable (provided)

Mains power cordANTENNA IN




							Back of unit
					L-1 IN/OUT		Mains outlet
ANTENNA					OUT
ANTENNA					OUT

ATTENTION:

Your TV must have a 21-pin AV input connector (SCART) for the connection to the unit.

It’s essential that your unit be properly connected.THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED.A Check the contents.

Make sure the package contains all of the accessories listed in “SPECIFICATIONS” on page 114.

B Install the unit.Place the unit on a stable, horizontal surface.C Connect the unit to a TV.ADisconnect the TV aerial cable from the TV.BConnect the TV aerial cable to the ANTENNA INconnector on the rear panel of the unit.

CConnect the ANTENNA OUT connector on the rear panel of the unit and the TV’s aerial connector with

the provided RF cable.

DConnect the L-1 IN/OUT connector on the rear panel of the unit and the TV’s 21-pin SCART connector with

a provided 21-pin SCART cable.

●The L-1 IN/OUT connector accepts and delivers either a composite signal (regular video signal), Y/C signal or RGB signal.

●Select an appropriate option of “L-1 OUTPUT” as follows ( pg. 82):

	When your TV’s SCART	Set “L-1 OUTPUT” to:
	connector accepts:	Set “L-1 OUTPUT” to:
	connector accepts:

	Y/C signal (separated
	luminance (brightness) and	“SCART S-VIDEO”
	chrominance (colour) signals)

	RGB signal	“SCART RGB”

●Set your TV to the VIDEO (or AV), Y/C, or RGB mode according to the type of your TV’s SCART connector.

●For switching the TV’s mode, refer to the instruction manual of your TV.D Connect the unit to mains.Connect the AC plug of the mains power cord into a mains outlet.

●“LOADING” blinks on the front display panel when the AC plug of the mains power cord is connected into a mains outlet, and it takes the unit approximately 50 seconds to be turned on. This is not a malfunction.

After connection is completed, perform “Auto Set Up” on page 19.

Contents

DVD VIDEO RECORDER INSTRUCTIONS 2 EN For Italy: 1.DO NOTplace the unit — —in an environment prone to extreme temperatures or humidity —in direct sunlight ATTENTION: To mobile phone users: On placing the unit: 4 EN DISC INFORMATION About Discs 6 EN Recording Medium and Format DVD-RAM ●Recording and erasing can be performed as many times as possible on a disc ●Editing can be performed after recording, such as deleting unwanted parts DVD-RW(VR mode) 8 EN Placing a Disc Opening the disc tray Press x on the unit or remote control to open the disc tray Unit Remote control 10 EN REAR VIEW AAntenna Input Connector (ANTENNA IN) pg BComponent Video Output Connectors (COMPONENT VIDEO OUT ) pg 12 EN GSimulated Surround Effect Indicator (3D) Lights when a simulated surround effect is set to “3D-ON”in Play Set Up menu HLinear PCM Indicator (LPCM) IRandom/Programme Playback Mode Indicator (RND/PRGM) pg 14 EN REMOTE CONTROL ATV Muting Button (TV ) pg. 86 B TV AV/ VIDEO Button pg C Number Keys pg. 30, 47, 51, 54, 68, 85, 99 Character Keys pg D Auxiliary Button (AUX) pg. 97 E Cancel Button (& (CANCEL)) pg. 43, 46, 54, 61, 77 16 EN S-VIDEOConnection Back of unit 8To connect to TV’s S-VIDEOinput and AUDIO input connectors A Connect the unit to a TV AConnect the aerial, unit and TV as per “Basic Connections”. ( pg. 16) 18 EN Component Video Connection INITIAL SETTINGS Auto Set Up 20 EN Preset Download rtENTER ●Perform steps A to C of “Auto Set Up” ( pg. 19) before continuing A Perform Preset Download arrow to “T-VLINK” and press ENTER 22 EN Monitor Set 8MONITOR TYPE 4:3LB (Letter Box conversion): 4:3PS (Pan&Scan): 16:9 AUTO (Wide television conversion): Language Menu/Audio/Subtitle Language Set Language Code List 26 EN Satellite Receiver Control Setting 0 – Setting satellite receiver’s brand and channel A Turn on the satellite receiver Turn on the satellite receiver’s power B Access the Main Menu screen C Access the “SAT/GUIDE PR” screen 28 EN PLAYBACK OPERATIONS Basic Playback 30 EN High-SpeedSearch 32 EN Marking positions to play again later Angle Selection 34 EN Live Memory Recording/playback status display Playback 36 EN Display during Live Memory Playback The superimpose display appears by pressing DISPLAY. ( pg. 14) This unit displays the current recording/playback status by the bar meter (Example of bar meter display) While stopped 38 EN To play back from the beginning of the programme while recording 1Start Live Memory Playback 1Start One Touch Replay function To watch a programme previously recorded while recording 40 EN Using Play Set Up Menu Basic operation on Play Set Up Menu 42 EN OFF: ALL REPEAT: TITLE REPEAT: TRACK REPEAT*: A-BRepeat Playback You can repeat the desired part 3Locate the start point Press ENTER at the beginning of the desired part you want to repeat (point A) ●The elapsed playing time of the point A appears 44 EN Time Search NORMAL CINEMA SHARP SOFT: 46 EN Parental Lock 48 EN To temporarily release Parental Lock Country/Area Code List for Parental Lock 50 EN RECORDING 52 EN Recording Features Watch Another Programme While Recording on the Unit Selection of the audio channel to be recorded on a disc 54 EN Page 56 EN Manual Timer Programming F Enter the recording stop time ●Each press of rt advances/goes back the stop time in 1-min.increments ●To advance/go back the stop time in 30-min.increments, press and hold rt VPS/PDC Recording 58 EN On-DiscTimer Page Page Page Page Programme Recording 64 EN Library Database DVD Navi About registration of information ●index* (reduced still pictures to show programme titles) ●programme title ●category ●date and time 66 EN Modify Original Information 68 EN Delete programme B Access the delete screen C Confirm the deletion Press w e to select “YES”, then press ENTER ●When you cancel the deletion, select “NO”, then press 70 EN H Return to the normal screen Add scenes to a play list Perform steps A to C of “Create Play List” ( pg. 70) before continuing E Confirm the addition APress w e to move the arrow to “PREVIEW”, then ● The selected scene is added 72 EN Delete unwanted part from play list Play back play list Delete play list A Select the play list(s) ●When you want the plural play MEMO Modify Library Information Register disc C Access the library screen BPress rt w e to move the arrow to “LIBRARY”, then press ENTER D Register the disc Press w e to move the arrow to “REGISTER”, then press 76 ENNAVIGATION (cont.) Locating the desired group and tracks C Display the item For MP3 Playback Press w e to move the arrow to “MP3” ●Only groups which contain MP3 files appear DV Dubbing MIX 80 EN Edit To Or From Another Recorder 82 EN 8L-1OUTPUT COMPONENT: 8L-1INPUT L-2Select Setting (L-2SELECT) 8L-2SELECT SAT VIDEO DECODER 8F-1INPUT Digital Audio Dubbing REMOTE CONTROL Remote Control Functions 86 EN Satellite Receiver Multi-BrandRemote Control Slide the TV/CABLE/SAT/DVD switch to CABLE/SAT switch to A Set the satellite receiver brand code TV/CBL/SAT 88 ENSYSTEM CONNECTIONS Perfect Connections (Recommended) Decoder 90 EN Connecting/Using A Decoder Connecting To A Dolby Digital Decoder Or An Amplifier With Built-inDTS DIGITAL OUT (COAXIAL) (OPTICAL) To DIGITAL AUDIO input Mode Set 8 DIGITAL AUDIO OUT DOLBY DIGITAL/PCM DOLBY DIGITAL/PCM: PCM ONLY PCM ONLY: 94 EN 8 SAVE AS LIBRARY 8 XP MODE REC AUDIO LINEAR PCM LINEAR PCM: 8 SUPERIMPOSE 8 GREY BACK 8 DIMMER DIMMED1 DIMMED2 96 EN 8 AUTO TIMER 8 RESUME DISC RESUME DISC RESUME: SHOWVIEW® System Setup 98 EN Tuner Set F View the Confirmation screen “SCAN COMPLETED” is rt w e ●The stations located in the selected country appear at the top of the list Manual Channel Set Store channels that were not stored during Auto Set Up ( pg. 19), Preset Download ( pg. 21) or Auto Channel Set ( pg. 98) B Access the Confirmation screen APress w e to select “INITIAL SET UP”, then press 100 EN When Receiving A Scrambled Broadcast A Select the decoder mode Set “L-2SELECT” to “DECODER”. ( pg. 83, “L-2Select Setting (L-2SELECT)”) C Select the position D Change the decoder setting 102 EN Fine-TuningChannels Already Stored TV Station And ID List ID STATION NAME TV1000 JIM Clock Set D Set Just Clock The default setting is “OFF” Press rt to select “JUST CLOCK”, then press won’t be able to receive regular clock adjustments E Set the source channel position for clock data Format A Disc Finalise A Disc 108 EN Scan Mode Set Tray Lock TROUBLESHOOTING GENERAL PLAYBACK 110 EN RECORDING INITIALIZING ON-SCREENMESSAGES 112 EN ON-SCREENMESSAGES (cont.) GLOSSARY 114 EN LIST OF TERMS M10S-DR