20 EN

INITIAL SETTINGS (cont.)
D Perform Auto Set Up.

APress ENTER.

●The AUTO SET/T-V LINK display appears on the TV screen.BPress rt to move thearrow to “AUTO EINSTELLUNG”, then press ENTER.

“AUTO” blinks on the front display panel; do NOT press any button on the unit or remote control until the front display panel shows “– –:– –” as illustrated on page 22.

●The AUTO SET screen willappear.

●When you have connected the unit to a TV offering T-V Link via a fully-wired 21-pin SCART cable ( pg. 16) and the TV is

turned on, the unit automatically performs the Preset Download ( pg. 21) even if you select “AUTO SET” for Auto Set Up function.

ATTENTION:

Once you have performed Auto Set Up, even if the unit’s memory backup has expired, all the stored stations and their Guide Program numbers remain in the unit’s memory and the unit will not perform Auto Set Up again. The unit only performs Auto Clock Set when the unit is turned on.

If you have moved to a different area, perform each setting as required.●Tuner setting ( pg. 98)●Clock setting ( pg. 104)

If a new station starts broadcasting in your area, perform tuner setting. ( pg. 98, “Tuner Set”)

NOTES:

●In areas where no TV station transmits a PDC (Programme Delivery Control) signal, the unit can perform neither Auto Clock Set nor Auto Guide Program Number Set.

●If there is a power cut, or if you press 1 or SET UP while Auto Set Up is in progress, Auto Set Up will be interrupted; be sure to turn off the unit power once and try again from step A.

●Auto Clock Set may not function properly depending on the reception condition.

●If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Set Up, the TV system setting for those channels may be incorrect.

Select the appropriate TV system for those channels. ( pg. 101, “INFORMATION”)After “Auto Set Up” is completed, perform “Monitor Set” on page 23.