JVC DT-V1910CG Basic Menu Operations, Main MENU, Setup Menu  about Menu Screens, Items Functions

BASIC MENU OPERATIONS

(MAIN MENU, SETUP MENU)

ABOUT MENU SCREENS

This monitor features a MAIN MENU (main menu screen) and a SETUP MENU (setup menu screen).

The MAIN MENU contains the functions normally used, and the SETUP MENU contains the settings required for initial setup.

“MAIN MENU”

Items		Functions	Displays
1	APERTURE CONTROL	Compensates the frequency characteristics of the input video signal.	*1
2	SLOT CONDITION	Displays the status of the input cards installed in each of the input card slots.
3	sub menu POSITION	Selects the display position of the sub menu superimposed on the screen.
4	AREA MARKER	Controls ON/OFF and other settings of the MARKER, SAFETY MARKER,	*2
		and ZOOM functions included in the AREA MARKER function.
5	COLOR MATRIX	Selects or adjusts the picture color matrix.	*1

About “Displays” *1 : Not displayed when an RGB signal is input.

*2 : Displayed only when the screen ratio is 16:9. Not displayed when an RGB signal is input. When some items are not displayed depending on the input signals, subsequent items will move up. Position of the menu varies depending on the type of signal.

“SETUP MENU”

Items		Functions
1	FUNCTION SETTING	Selects the control systems for the COLOR SYSTEM, synchronized signal, RUSH DELAY TIME,
		tally lamp colors, and MAKE/TRIGGER terminal.
		* Checks the amount of time that the monitor has been used.
		* Sets the AUTO INPUT function ON/OFF. (When an input card compliant with AUTO INPUT is
		installed.)
		* Selects the audio channel group for the EMBEDDED AUDIO. (When an input card compliant
		with EMBEDDED AUDIO is installed.)
2	PICTURE SUB ADJ.	Controls the approximate adjustment of the video control level when the video adjustment knob is
		adjusted to the center.
		* Can also be used to switch the NTSC set-up level, and change the component signal’s input level settings.
3	COLOR TEMP./BAL.	Sets or adjusts the color temperature or white balance.
4	SIZE/POSI. ADJ.	Adjusts the size or position of the picture.
5	DISTORTION ADJ.	Compensates the picture distortion.
6	STATUS DISPLAY	Sets the status display ON/OFF.

*Switches the display on and off. Also selects the type of display. (When an input card compliant with AUDIO LEVEL METER is installed.)

*Switches the AUDIO PLL setting. (When SDI input card compliant with EMBEDDED AUDIO is installed.)

7	CONTROL LOCK	Sets the control lock preventing the monitor from misuse.
8	all reset	Sets all items in SETUP MENU to factory-preset values.

BUTTONS FOR MENU OPERATIONS

MUTING

VOLUME

DEGAUSS

MENU

MENU

13