JVC DT-V1910CG, DT-V1710CG manual Selects the colour system when using the video input card

ITEM CONTENTS AND ADJUSTMENT RANGE/SETTINGS

FUNCTION SETTING

Selects the control systems for the COLOR SYSTEM, synchronized signal, RUSH DELAY TIME, tally lamp colours, and MAKE/TRIGGER terminal.

•Checks the amount of time that the monitor has been used.

•Sets the AUTO INPUT function ON/OFF. (When an input card compliant with AUTO INPUT is installed.)

•Selects the audio channel group for the EMBEDDED AUDIO. (When an input card compliant with EMBEDDED AUDIO is installed.)

SYNC SELECT

Synchronized signal selection.

INT. : The input video signal is synchronized with the built-in sync signal.

EXT. : The input video signal is synchronized with an external signal from an external sync terminal.

RUSH DELAY TIME

Sets the time when the power supply to the monitor’s circuits (excluding the micro computers) starts after the power switch is pressed.

Press the button to display the setting menu illustrated on the right.

COLOR SYSTEM

<FUNCTION SETTING>

COLOR SYSTEM	:AUTO
AUTO INPUT	:ON
SYNC SELECT	:INT.
RUSH DELAY TIME	:STD.
TALLY SELECT	:GREEN
REMOTE SYSTEM	:MAKE
E.AUDIO GROUP	:1G
HOUR METER X100h	:000

EXIT: MENU ADJUST:-+ SELECT:

STD. : The power supply starts approx.

1 second after the power switch is pressed. SLOW : The power supply starts approx.

3.2 seconds after the power switch is pressed.

NOTE:

If you are going to turn several Multi-Format Monitors on at the same time, it is recommended to apply SLOW to some of the monitors to control rush current.

Selects the colour system when using the video input card.

AUTO : Changes NTSC and PAL automatically.

NTSC : Keeps the colour system NTSC.

PAL : Keeps the colour system PAL.

NOTE:

Normally select AUTO. However, if the input signal is unstable,

select NTSC or PAL.

AUTO INPUT

When HD SDI signal and D1 SDI signal need to be switched to input accordingly by one signal cable, AUTO INPUT automatically detects whether a signal is being input to Input A (HD SDI input card) or Input C (SDI input card) and switches INPUT accordingly.

ON	: AUTO INPUT is ON.
OFF	: AUTO INPUT does not function.

NOTES:

•Functions only when input card compatible with AUTO INPUT is used.

•“INPUT SELECT ERROR” is displayed for approx. 3 seconds when different signal cables are connected to each INPUT A and INPUT C and signals are input to the each of them.

Preparation for the AUTO INPUT function (See below illustration)

1.Insert HD SDI input card to SLOT1, and SDI input card to SLOT2 (both cards need to be compatible with AUTO INPUT), then connect the signal cable.

2.Input HD SDI signal or D1 SDI signal to HD SDI input card.

HD SDI input card	SLOT1	SLOT2
			D1 SDI input card
compatible with
			compatible with
AUTO INPUT
	E.AUDIO	SWITCHED	AUTO INPUT
	HD SDI 1
		OUT
	IN
		IN1
	OUT	E.AUDIO
		SDI
		IN2

TALLY SELECT

Selects the colour of the tally lamp (when lit) on the upper front panel.

GREEN : The tally lamp lights in green.

RED : The tally lamp lights in red.

REMOTE SYSTEM

Selects the control system for the MAKE/TRIGGER terminals. Refer to “HOW TO USE THE MAKE/ TRIGGER TERMINAL” on page 23.

•MAKE (make contact)/TRIGGER (trigger contact)

E.AUDIO GROUP

Selects the audio channel group for EMBEDDED AUDIO. It is displayed when an input card compliant with EMBEDDED AUDIO is installed.

•1G/2G/1-2G

1G : 1ch2ch3ch4ch1-2ch3-4ch 1-4ch

2G : 5ch6ch7ch8ch5-6ch7-8ch5-8ch

1-2G1ch:2ch3ch4ch5ch6ch7ch 8ch1-2ch AUTO5-8ch1-4ch7-8ch5-6ch3-4ch

NOTE:

The auto setting mixes and outputs all 8 signal channels. Sets the output level automatically by detecting the number of channels receiving the signal.

* About sound output level

Sound output level is set to a standard output level for all channels when several sound channels are output at the same time. The more channels are selected, the lower each channel’s level will be.

(Each channel's level becomes half for 1– 2 channel, 1/4 for 1– 4 channel.)

HOUR METER X100h

Displays the total usage time of the monitor in hundred-hour units.

•000 ~ 655

NOTES:

•When the timer passes 655, it returns to 000.

•The timer does not count the usage time under one hour.

ENGLISH

19