JVC DT-V1710CG, DT-V1910CG manual HOW to USE Setup Menu contd

HOW TO USE “SETUP MENU” (cont'd)

PICTURE SUB ADJ.

Controls the approximate adjustment of the video control level when the video adjustment knob is adjusted to the center.

•Can also be used to switch the NTSC set-up level, and change the component signal’s input level settings.

COLOR TEMP./BAL.

Sets or adjusts the color temperature or white balance.

Press the	button to
display the setting menu		<COLOR TEMP./BAL.>
		COLOR TEMP.	:LOW
illustrated on the right.
		BLUE DRIVE	: 000
		RED DRIVE	: 000
		GREEN CUTOFF	: 000

Press the button to display the setting menu illustrated on the right.

NOTE :

When the RGB signal is input, only CONTRAST and BRIGHT are displayed. When the PAL signal is input, only CONTRAST, BRIGHT and CHROMA are displayed.

<PICTURE SUB ADJ.>

CONTRAST	: 00
BRIGHT	: 00
CHROMA	: 00
PHASE	: 00
NTSC SETUP	: 00
COMPO.LEVEL	:SMPTE
sub menu
reset

EXIT: MENU ADJUST:-+ SELECT:

• Use the five items indicated with	BLUE CUTOFF			: 000
mark to make fine adjustments	RED CUTOFF			: 000
	sub menu
between the monitors.	reset
	EXIT:		ADJUST:- + SELECT:
		MENU

COLOR TEMP.

Selects the color temperature.

HIGH : Sets the color temperature to 9300.

LOW : Sets the color temperature to 6500.

CONTRAST

•–20 ~ 00 ~ +20

BRIGHT

•–20 ~ 00 ~ +20

CHROMA

•–20 ~ 00 ~ +20

PHASE

•–20 ~ 00 ~ +20

NTSC SETUP

Sets the set-up level of the input NTSC signal.

00: Compliant with 0% set-up signal.

7.5 : Compliant with 7.5% set-up signal.

NOTE :

NTSC SETUP is displayed only when the video input card is installed and an NTSC signal is input.

COMPO. LEVEL

Sets the set-up level of the input component signal.

SMPTE : Compliant with M2VTR signals.

B75 : Compliant with Betacam 7.5% set-up signal.

B00 : Compliant with Betacam 0% set-up signal.

NOTE :

COMPO. LEVEL is displayed only when a 480/60i, 480/60p, 576/

50i or 576/50p signal is input.

BLUE DRIVE

Adjusts the blue drive level.

•MIN ~ 000 ~ MAX (in 127 grades)

RED DRIVE

Adjusts the red drive level.

•MIN ~ 000 ~ MAX (in 127 grades)

GREEN CUTOFF

Sets the green cut-off point.

•MIN ~ 000 ~ MAX (in 205 grades)

BLUE CUTOFF

Sets the blue cut-off point.

•MIN ~ 000 ~ MAX (in 205 grades)

RED CUTOFF

Sets the red cut-off point.

•MIN ~ 000 ~ MAX (in 205 grades)

20