HOW TO USE “SETUP MENU” (cont'd)

STATUS DISPLAY

Sets the status display ON/OFF.

*Switches the display on and off. Also selects the type of display. (When an input card compliant with AUDIO LEVEL METER is installed.)

*Switches the AUDIO PLL setting. (When SDI input card compliant with EMBEDDED AUDIO is installed.)

OVER LEVEL ()

Sets the input level’s lower limit indicated in red for the “3COLORS” display.

–8dB/–6dB/–4dB/–2dB

BAR BRIGHTNESS ()

Selects the brightness of the AUDIO LEVEL METER display.

Press the button to display the setting menu illustrated on the right.

NOTE:

Function setting is displayed when input card compliant with AUDIO LEVEL METER is installed.

<STATUS DISPLAY>

STATUS DISPLAY

: ON

LEVEL METER ch

:31•24

BAR TYPE

:3COLORS

REFERENCE LEVEL

: -20dB

OVER LEVEL

: -4dB

BAR BRIGHTNESS

: HIGH

EXIT: MENU ADJUST:-+ SELECT:

HIGH : Brighter

LOW : Darker

AUDIO LEVEL METER display example

LEVEL METER ch: 1-8, BAR TYPE: 3COLORS

OVER LEVEL

STATUS DISPLAY

Sets the status display ON or OFF.

ON : The information is displayed.

OFF : The information is not displayed.

LEVEL METER ch

Selects the audio channels used in the AUDIO LEVEL METER display.

OFF/1:2/12:34/31:24/123:456/1-8

NOTES:

Numbers indicate the audio channel. The channel input level indicated on the left side of “:” is displayed on the left side of the screen, and the channel input level indicated on the right side of “:” is displayed on the right side of the screen.

AUDIO LEVEL METER is not displayed when this is set to OFF.

When “1-8” is selected, the channel input level for 1, 2, 3 and 4 is displayed on the left side of the screen, and the channel input level for 5, 6, 7 and 8 is displayed on the right side of the screen.

BAR TYPE

Selects the color of the audio level meter.

WHITE-1 :White color display

WHITE-2 :White (half transparent) display

3 COLORS : The audio level meter uses three different colors (red, yellow and green) to indicate variations in input levels.

Red

: displayed when the audio input exceeds the

 

level set in “OVER LEVEL”.

Yellow

: displayed when the audio input exceeds the

 

level set in “REFERENCE LEVEL”.

Green

: displayed when the audio input does not

 

exceed the level set in “REFERENCE

 

LEVEL”.

NOTES:

For WHITE-1 and WHITE-2, the line indication for the standard input level set in the “REFERENCE LEVEL” is displayed. Input level set in the “OVER LEVEL” is not displayed.

As for the audio channel bar display with no signal input, white is displayed for the 3COLORS setting, and gray is displayed for other settings.

REFERENCE LEVEL ()

Sets the standard input level.

–20dB/–18dB

 

[–8dB/–6dB/–4dB/–2dB]

 

 

REFERENCE

 

 

LEVEL [–20dB/

 

 

–18dB]

 

1 2 3 4

Audio channels and OVER/REFERENCE

5 6 7 8

 

 

 

level indication

 

CONTROL LOCK

CONTROL LOCK

Invalidates most of operations on the front panel (including menu screen operations).

OFF : Enables normal operations.

ON : Invalidates all operations except the power switch and CONTROL LOCK.

NOTES:

While CONTROL LOCK is set to ON, attempting to perform any operation except power switch and CONTROL LOCK causes the “ Control lock on!” warning to appear on the screen for approx. 3 seconds. (It is possible to operate the power switch and display

SETUP MENU.)

When SETUP MENU is displayed while CONTROL LOCK is set to ON, the cursor (4) is located next to CONTROL LOCK and cannot be moved.

all reset

Resets all SETUP MENU items to factory-preset values.

1.Select “all reset” by / buttons, then press button. Confirmation message is displayed.

2.To initialize, press button.

To cancel the initialization, press the MENU button.

22

Page 22
Image 22
JVC DT-V1710CG, DT-V1910CG manual All reset