JVC DT-V1710CG, DT-V1910CG manual Controls and Features, Front View

CONTROLS AND FEATURES

FRONT VIEW

<Front Panel>

1

(Front view of DT-V1910CG shown)

2

3

4

5

7	8	11	12	13	14
	MUTING	DEGAUSS	UNDER	PULSE	COLOR
			SCAN	CROSS	OFF
	VOLUME	MENU	SCREENS	ASPECT	AREA
			CHECK		MARKER

6 9 6 10 15 16 17

18

	SLOT1		SLOT2		SLOT3
A	B	C	D	E	F
		INPUT SELECT

1920

POWER

1

Tally lamp

Lights when the tally control signal is ON.

•Set the MAKE/TRIGGER terminal’s tally control in the REMOTE (external control) terminal setup menu.

The lamp color can be set to red or green.

•To set the color, use TALLY SELECT in the “FUNCTION SETTING” setup menu or MAKE/TRIGGER in the REMOTE (external control) terminal setup menu.

For details, refer to Page 19 and 23.

7MUTING button

Pressing this button mutes the output sound.

•To cancel “MUTING ON” (no sound), press MUTING button again, or press the VOLUME “–” or “+” buttons.

NOTE:

When a menu or setting item (such as MAIN MENU, SETUP MENU, sub-menu, or VOLUME bar) is displayed on the screen, this button functions as a control button for the menu screen. In this case, it will not mute the sound when pressed.

2PHASE adjustment knob Adjusts picture hue.

•Turn the knob to the left to make the picture redder, and turn it to the right to make the picture greener.

3CHROMA adjustment knob Adjusts picture color density.

•Turn the knob to the left to make the picture color lighter, and turn it to the right to make the picture color deeper.

4BRIGHT adjustment knob Adjusts picture brightness.

•Turn the knob to the left to make the picture darker, and turn it to the right to make the picture brighter.

5CONTRAST adjustment knob Adjusts picture contrast.

•Turn the knob to the left to make the picture contrast lower, and turn it to the right to make the picture contrast higher.

6VOLUME buttons

Adjusts the speaker volume.

•Pressing this button displays the VOLUME level bar on the screen. Pressing the button again allows you to adjust speaker volume.

8EMBEDDED AUDIO channel switch button

Press this button while the VOLUME bar is displayed on the screen to change the input sound channel.

• When the	!	button is pressed, the next highest
channel is selected.
• When the		button is pressed, the next lowest channel
	!
is selected.

NOTES:

Switchable channels correspond with the group selected in the “E.AUDIO GROUP” of the “FUNCTION SETTING” setup menu.

*Valid when an input card compliant with EMBEDDED AUDIO is installed.

9Menu select buttons

Selects menu screen items or set-up menu screen.

10MENU button

Displays, adjusts or closes a menu screen.

11DEGAUSS button/lamp

Press the DEGAUSS button. The button lights and degaussing is performed automatically.

•When the degaussing is completed, the light goes off.

4