JVC DT-V1710CG, DT-V1910CG manual  SDI Input Card IF-C01SDG

CONTROLS AND FEATURES

(INPUT CARD: OPTIONAL) (cont'd)

SDI INPUT CARD (IF-C01SDG)

	SWITCHED
	OUT
IN	SDI 1
IN	SDI 2

AUDIO1

IN OUT

AUDIO2

1

2

4

3

1 SWITCHED OUT terminal

Output (OUT) terminal for the re-clocked signal. The input signal from SDI 1 or SDI 2 (selected with the INPUT SELECT buttons) is re-clocked and output from this terminal.

NOTES:

•Even when the input signal is switched from the SDI Input Card, the SWITCHED OUT terminal still outputs the SDI 1 or SDI 2 re-clocked signal (whichever you selected last).

•No signal is output from the SWITCHED OUT terminal when the monitor is turned off or in the stand-by mode.

2 D1 SDI signal input terminal (SDI 1, SDI 2)

Accepts an SMPTE259M compliant D1 SDI signal (component serial digital signal).

Select SDI 1 input: press INPUT SELECT A (SLOT1)/C (SLOT2)/E (SLOT3) buttons.

Select SDI 2 input: press INPUT SELECT B (SLOT1)/D (SLOT2)/F (SLOT3) buttons.

NOTE:

Not compliant with EMBEDDED AUDIO.

Compatible signal formats: 480/60i, 576/50i

3Audio signal input/output terminals (for both SDI 1 and SDI 2)

Input (IN) and output (OUT) terminals for the analogue audio signals.

•The IN and OUT terminals are bridge-connected.

4 Connection terminal

Attach to the connection terminal of your Multi-Format Monitor.

HD SDI INPUT CARD (IF-C12HSDG)

Compliant with EMBEDDED AUDIO

E.AUDIO

HD SDI 1

IN

OUT

E.AUDIO

HD SDI 2

IN

OUT

1

1

2

HD SDI signal input/output terminals (HD SDI 1, HD SDI 2)

Input (IN) and output (OUT) terminals for the HD SDI signal (HD component serial digital signal)

This card is also compatible with EMBEDDED AUDIO signals with a 48 kHz sampling frequency and channel range of 1 to 8 channels.

The EMBEDDED AUDIO output channel is controlled from this monitor.

Refer to “EMBEDDED AUDIO channel switch button” on page 4 for more information.

Select HD SDI 1 input press INPUT SELECT A (SLOT1)/C (SLOT2)/E (SLOT3) buttons.

Select HD SDI 2 input : press INPUT SELECT B (SLOT1)/D (SLOT2)/F (SLOT3) buttons.

OUT terminal

The re-clocked HD SDI 1 and/or HD SDI 2 input signal is output from the HD SDI 1 OUT and/or HD SDI 2 OUT terminal.

NOTE:

•Signals cannot be output from the OUT terminal when the monitor’s power is OFF or in the stand-by mode.

Compatible signal formats:

720/60p, 1080/50i, 1080/60i, 1035/60i, 1080/24psF, EMBEDDED AUDIO

2 Connection terminal

Attach to the connection terminal of your Multi-Format Monitor.

8