JVC DT-V1710CG, DT-V1910CG manual  Displaying the Menu Screens,  Menu Operation Procedure

BASIC MENU OPERATIONS

(MAIN MENU, SETUP MENU) (cont'd)

DISPLAYING THE MENU SCREENS

To display MAIN MENU

Press the MENU button on the front panel.

To display SETUP MENU

Press the button while pressing the button on the front panel.

NOTES:

•To exit the MENU, press the MENU button several times.

•The MENU automatically exits about 30 seconds after the last Menu operation.

•To go back the previous MENU, press MENU.

About “ sub menu”

Only displays selected items. (sub-menu display) Allows you to adjust and set items while looking at the actual screen.

NOTE:

•This function is available only when “ sub menu” is displayed in the MENU.

Example: Setting an item in the “PICTURE SUB ADJ.” with the sub-menu.

1. Press the button while button is pressed.

“SETUP MENU” is displayed on the screen.

MENU OPERATION

PROCEDURE

Example: Adjusting the “BRIGHT” value to “+10”.

1.Press the button while button is pressed.

“SETUP MENU” is displayed on the screen.

<SETUP MENU>

FUNCTION SETTING

PICTURE SUB ADJ.

COLOR TEMP/BAL.

SIZE/POSI.ADJ.

DISTORTION ADJ.

STATUS DISPLAY

CONTROL LOCK :ON all reset

EXIT: MENU ENTER:+ SELECT:

2.Select “PICTURE SUB ADJ.” by pressing the button, then press the button.

“PICTURE SUB ADJ.” menu is displayed on the screen.

<PICTURE SUB ADJ.>

CONTRAST	: 00
BRIGHT	: 00
CHROMA	: 00
PHASE	: 00
NTSC SETUP	: 00
COMPO.LEVEL	:SMPTE
sub menu
reset

EXIT: MENU ADJUST:-+ SELECT:

3.Select “BRIGHT” by pressing the button .

4.Press the and/or buttons as many times as required to obtain the brightness desired.

Example: Setting brightness to “+10”.

<PICTURE SUB ADJ.>

CONTRAST	: 00
BRIGHT	:+10
CHROMA	: 00
PHASE	: 00
NTSC SETUP	: 00
COMPO.LEVEL	:SMPTE
sub menu
reset

EXIT: MENU ADJUST:-+ SELECT:

5.Delete the “SETUP MENU” by pressing the MENU button several times.

2.Select “PICTURE SUB ADJ.” by pressing the button, then press the button.

3.Select “ sub menu” by pressing the button several times, then press the button.

The adjustment bar is displayed at the bottom or top of the screen.

4.Select the desired setup item by pressing the and buttons (several times).

5.Press the and/or buttons as many times as required to obtain the desired setting.

To delete the sub-menu display:

Press the MENU button on the front panel.

•The previous MENU display is restored.

To change the position of the sub-menu display

1.Display the “MAIN MENU” by pressing the MENU button.

2.Select “sub menu POSITION” by pressing the button several times.

3.Set “UPPER” or “LOWER” by pressing the and buttons.

CONTRAST : 00

--+ + [UPPER]

CONTRAST : 00

--+ + [LOWER]

About “reset”

Restores all MENU settings (currently displayed) to factory-preset values.

Select “reset” using the / buttons, then press the button.

NOTE:

•This function is only available when “reset” is displayed in the MENU.

14