JVC EX-A10 manual DVD player Speaker Receiver

Connections

Preparation

Do not turn on the power until you complete the connection.

Standard setup

DVD player

Speaker Receiver Speaker

Connecting the antennas

Connecting the AM loop antenna (supplied)

1 Set up the AM loop antenna.	3 Turn the AM loop antenna to find the best
	position for radio reception.
	Place the AM loop antenna as far from the
	receiver as possible.
	• Do not place the AM loop antenna on a metallic
	table or close to a TV, computer, or other electric
	appliances. Doing so may affect radio reception.
	7 When radio reception with the supplied AM
	loop antenna is poor
2 Connect the antenna cord.	Electric wire: 3 - 5 m (not supplied)

Receiver

(rear panel)

White

Black

	If insulation covers
	the tips of the
Connect the ends of the	antenna cord,
antenna cord as shown	twist and pull off
above.	the insulation.

Twist together electric wire and

the AM Electric

loop wire antenna

cord.

AM loop antenna cord

Receiver

(rear panel)

Stretch out the electric wire horizontally, preferably in a high place such as above a window or outdoors. Connect the AM loop antenna cord to the receiver together with the electric wire.

When positioning the antennas, find the best position for reception while listening to an actual radio program (refer to “Listening to radio broadcasts” (A page 18)).

7