Connections
Preparation
Do not turn on the power until you complete the connection.
Standard setup
DVD player
Speaker Receiver Speaker
Connecting the antennas
Connecting the AM loop antenna (supplied)
1 Set up the AM loop antenna. | 3 Turn the AM loop antenna to find the best |
| position for radio reception. |
| Place the AM loop antenna as far from the |
| receiver as possible. |
| • Do not place the AM loop antenna on a metallic |
| table or close to a TV, computer, or other electric |
| appliances. Doing so may affect radio reception. |
7 When radio reception with the supplied AM loop antenna is poor
2Connect the antenna cord.
Receiver
(rear panel)
White
Black
Electric wire: 3 - 5 m (9′ 10″ - 16′ 5″) (not supplied)
Twist |
| Stretch out the electric | |
together |
| ||
| wire horizontally, | ||
electric |
| ||
| preferably in a high | ||
wire and |
| ||
| place such as above a | ||
the AM | Electric | ||
window or outdoors. | |||
loop | wire | Connect the AM loop | |
antenna |
| antenna cord to the | |
cord. |
| ||
| receiver together with | ||
|
| ||
AM loop | the electric wire. | ||
antenna cord |
| ||
Connect the ends of the antenna cord as shown above.
If insulation covers the tips of the antenna cord, twist and pull off the insulation.
Receiver
(rear panel)
When positioning the antennas, find the best position for reception while listening to an actual radio program (refer to “Listening to radio broadcasts” (A page 18)).
7