JVC EX-A10 manual Pausing playback

Basic operations of the DVD player (continued)

Pausing playback

7When a disc is played back

1 Slide the remote control mode selector to DVD.

2 Press 8.

•To return to normal playback, press 3 (play).

Advancing the picture frame by frame

(only for moving image)

7When a disc is paused

1 Slide the remote control mode selector to DVD.

2 Press 8 repeatedly.

Fast reverse/fast forward search

7When a disc is played back

1 Slide the remote control mode selector to DVD.

There are two methods in step 2.

2 Press 1 or ¡.

•Each time you press the button, the speed increases. To restore the normal speed, press 3 (play).

Hold down PREVIOUS 4 or NEXT¢.

•Fast reverse/fast forward search can be used only while the button is pressed.

NOTE

•For some discs, sound is intermittent or no sound will be produced during fast reverse/fast forward search.

•The selectable speeds and displays vary by the disc type.

		Messages displayed on the TV when the power is turned on
	The following messages appear depending on the status of the DVD player.
NOW READING			Appears when the DVD player is reading the disc information. Wait for a while.
REGION CODE			Appears when the Region Code of the DVD does not match the code the DVD
ERROR!			player supports. (A page 49)
NO DISC			Appears when no disc is loaded.
OPEN			Appears when the disc tray is opening.
CLOSE			Appears when the disc tray is closing.
CANNOT PLAY THIS			Appears when an unplayable disc is attempted to be played back.
DISC

27