JVC EX-A10 manual TV Channel

Operating the TV using the remote control

You can operate your TV using the remote control of this system.

Manufacturer	Code	Manufacturer	Code	Introduction
JVC	01	Nordmende	13, 14, 18,
			26-28
Akai	02, 05	Okano	09
Blaupunkt	03	Orion	15
Daewoo	10, 31, 32	Panasonic	16, 17
Fenner	04, 31, 32	Philips	10
			13, 14, 18,

TV CHANNEL

Remote control mode selector

FTV TV/VIDEO

TV

VOLUME

Fisher	05	Saba	26-28
Grundig	06	Samsung	10, 19, 32
Hitachi	07, 08	Sanyo	05
Inno-Hit	09	Schneider	02, 05
Irradio	02, 05	Sharp	20
Magnavox	10	Sony	21-25
Mitsubishi	11, 33	Telefunken	13, 14, 18,
			26-28
Miver	03	Thomson	13, 14, 18,
			26-28, 30

ENTER

Number buttons

Setting the manufacturer code

1 Slide the remote control

mode selector to TV.

2 Hold down FTV.

• Hold down FTV until you finish step 4.

3 Press ENTER and release.

4 Press number buttons (1-9, 0).

•Refer to “Using the number buttons” (A page 15).

Examples:

For a Hitachi TV: Press 0, then 7.

For a Toshiba TV: Press 2, then 9.

When the manufacturer of your TV has two or more codes, select the manufacturer codes in turn and find the one that operates the TV and the remote control properly.

Nokia 12, 34 Toshiba 29

NOTE

•A manufacturer code is subject to change without notice. You may not be able to operate the TV produced by the manufacturer.

5 Release FTV.

Using the remote control for the TV operation

Operate the remote control by pointing it at the TV.

Turns on/off the TV.

Changes the channels.

Adjusts the volume.

~	/	Selects the channels.
/
	*1	Switches the
		previously selected
		channel and the
		current channel.

Switches the TV and video input.

*1 Make sure to slide the remote control mode selector to TV in advance.

NOTE

•After replacing the batteries of the remote control, set the manufacturer code again.

•When the remote control mode selector is slid to TV, some buttons may not work.

6