JVC EX-A10 manual Press Display Radio Data System repeatedly, Press Search

For the locations of the remote control buttons, refer to page 18.

2 Press DISPLAY (Radio Data System) repeatedly.

PS (Program Service):

While the receiver is searching for Radio Data System information, “WAIT PS” appears and then the radio station names will be displayed. “NO PS” appears if no signal is received.

PTY (Program Type):

While the receiver is searching for Radio Data System information, “WAIT PTY” appears and then the type of the broadcasted program will be displayed. “NO PTY” appears if no signal is received.

RT (Radio Text):

While the receiver is searching for Radio Data System information, “WAIT RT” appears and then text messages sent by the radio station will be displayed. “NO RT” appears if no signal is received.

NOTE

•If the receiver takes time to show the Radio Data System information received from a radio station, “PS”, “PTY” or “RT” may appear in the display window on the receiver.

•When PS, PTY or RT signals appear in the display window on the receiver, irregular characters and marks may not be displayed correctly.

Searching for programs by PTY codes (PTY search)

You can locate a type of radio program by specifying the corresponding PTY code.

•The PTY search is applicable only to the preset radio stations.

7When an FM radio broadcast is selected as the sound source

1 Slide the remote control mode selector to

RECEIVER.

2 Press SEARCH.

Display on the receiver

3 Press PTY + or PTY – repeatedly to select a PTY code while “PTY SELECT” is flashing.

Example:

When “Document” is selected as a PTY code

• Refer to page 21 for the PTY codes.

4 Press SEARCH.

•While the receiver is searching for a radio program, “SEARCH” and the selected PTY codes will be displayed.

Example:

When “Document” is selected as a PTY code

•The receiver searches 30 preset FM radio stations, and stops when the receiver finds the one you have selected. At this time the selected frequency and PTY code flash.

When SEARCH is pressed while the selected frequency and PTY code are flashing, the receiver automatically starts searching for the next radio station. After the frequency and PTY code stop flashing or if a button is pressed, the receiver automatically tunes in to the radio station.

•To stop searching, press SEARCH.

•If no program is found, “NOT FOUND” appears in the display window on the receiver and the receiver returns to the last received radio station.

Listening to radio

20