7 Press 2 or 3 (cursor) to select the desired sound source, and then press SET.

If you have selected “FM” or “AM” in this step, press 2, 3 (cursor) or the number buttons to select the preset number of the radio station whose broadcast you want to

listen to (Refer to “Using the number buttons” (A page 15)), and then press SET.

8 Press 2 or 3 (cursor) to adjust the playback volume, and then press SET.

You can use the number buttons to specify the volume.

The settings will appear in the display window on the receiver.

9 Press F AUDIO to turn off the receiver.

The playback timer is available only when the receiver is off.

This indicator lights up when the playback timer is activated.

NOTE

Complete the playback timer setting at least 1 minute prior to the starting time you have selected in step 4.

While setting the playback timer, you can return to the previous step by pressing CANCEL or you can stop the setting by pressing CLOCK/TIMER.

When the playback starts, the volume gradually increases to the selected level.

You can make a variety of playback settings by combining the playback timer and saving the

settings for program playback, random playback or repeat playback. (A page 34)

Canceling the playback timer

Timer

Press CANCEL after following

steps 1 and 2 on page 45.

 

NOTE

Even after you canceled the playback timer, the setting remains stored.

Activating the playback timer again

After following steps 1 and 2 on page 45, press ENTER. Then press

FAUDIO to turn off the receiver.

NOTE

When the power cord of the receiver is disconnected from the AC outlet or the power is interrupted, the clock and the playback timer settings may be lost. If the settings are lost, set the clock and playback timer again.

Confirming the playback timer settings

Press SET repeatedly after following steps 1, 2 and 3 on page 45.

To return to the normal display while confirming the settings, press CLOCK/TIMER.

Changing the playback timer settings

Set the playback timer again from step 1 on page 45.

46

Page 111
Image 111
JVC EX-A10 manual Press F Audio to turn off the receiver