JVC EX-A10 manual Press F Audio to turn off the receiver

For the locations of the remote control buttons, refer to page 42.

9 Press F AUDIO to turn off the receiver.

•The playback timer is available only when the receiver is off.

This indicator lights up when the playback timer is activated.

NOTE

•Complete the playback timer setting at least 1 minute prior to the starting time you have selected in step 4.

•While setting the playback timer, you can return to the previous step by pressing CANCEL or you can stop the setting by pressing CLOCK/TIMER.

•When the playback starts, the volume gradually increases to the selected level.

•You can make a variety of playback settings by combining the playback timer and saving the

settings for program playback, random playback or repeat playback. (A page 31)

Canceling the playback timer

Press CANCEL after following steps 1 and 2 on page 43.

Activating the playback timer again

After following steps 1 and 2 on page 43, press ENTER. Then press

FAUDIO to turn off the receiver.

NOTE

•When the power cord of the receiver is disconnected from the AC outlet or the power is interrupted, the clock and the playback timer settings may be lost. If the settings are lost, set the clock and playback timer again.

Confirming the playback timer settings

Press SET repeatedly after following steps 1, 2 and 3 on page 43.

•To return to the normal display while confirming the settings, press CLOCK/TIMER.

Changing the playback timer settings

Set the playback timer again from step 1 on page 43.

Timer

NOTE

•Even after you canceled the playback timer, the setting remains stored.

44