JVC EX-A10 manual Basic operations, Refer to Changing the display in the display window. a

Basic operations (continued)

Setting the clock

You can set the clock when the receiver is turned either on or off.

Example:

To set the clock to 10:30 a.m. on Wednesday

1 Slide the remote control mode selector to

RECEIVER.

2 Press CLOCK/TIMER.

Display on the receiver

3 Press 2 or 3 (cursor) to select the hour.

•Hold down the button to incrementally increase the hour setting.

•You can also use the number buttons to specify the hour. Refer to “Using the number buttons” shown on the right.

4 Press SET.

5 Press 2 or 3 (cursor) to select the minute.

•Hold down the button to incrementally increase the minute setting.

•You can also use the number buttons to specify the minute. Press SET.

6 Press SET.

7 Press 2 or 3 (cursor) to select the day of the week.

•Hold down the button to change the setting for the day of the week.

•Abbreviations are used for the days of the

week.

Sun. → Sunday Mon.→ Monday Tue. → Tuesday Wed.→Wednesday Thu. → Thursday Fri. → Friday Sat. → Saturday

8 Press SET.

•The clock starts from 0 seconds in the minute you set.

NOTE

•While setting the clock, you can return to the previous step by pressing CANCEL.

•The time display on the receiver is a 24-hour clock.

•The clock will gain or lose about 1 minute per month.

•If the power cord of the receiver is disconnected from the AC outlet or the power is interrupted, the clock setting is stored for about 1 minute.

•You cannot set the clock when “DISPLAY OFF” is selected. (A page 16)

Adjusting the clock

Press CLOCK/TIMER twice to display the clock, and then adjust the clock starting from step 3.

Displaying the clock when using the receiver

Press DISPLAY.

•Refer to “Changing the display in the display window”. (A page 26)

Using the number buttons Examples:

5:

15:→ →

150:→ → → →

15