JVC EX-A10 manual Connecting the speakers

Connections (continued)

Do not turn on the power until you complete the connection.

Connecting the speakers

There is no difference between the left and right speakers.

Speaker terminal Speaker cord

Before connecting the speaker cords, twist and pull off the insulation.

Speaker terminal Speaker cord

TWEETER

WOOFER

Right speaker

(rear panel)

TWEETERTWEETER

RIGHTRIGHT

WOOFERWOOFER

RIGHTRIGHT

Speaker cords

(supplied)

TWEETER	TWEETER
LEFT	LEFT
WOOFER	WOOFER
LEFT	LEFT

Receiver (rear panel)

TWEETER

WOOFER

Left speaker (rear panel)

•An incorrect connection may damage the speakers.

•The supplied speakers are dedicated to the supplied receiver as parts of the EX-A10 system. Do not connect the supplied speakers to equipment other than the supplied receiver. Doing so may damage the speakers.

CAUTION

•Do not short-circuit the ª and · speaker terminals. Doing so may damage the receiver.

•Do not connect other speakers together with the supplied speakers. The change in impedance may damage the receiver and the speakers.

•Improper speaker cord connection spoils the stereo effect and sound quality.

•The supplied speakers are magnetically shielded, but color irregularity may occur on the TV depending on some conditions. To prevent color irregularity, set up the speakers following the instructions below.

1.Turn off the main power of the TV before setting up the speakers.

2.Place the speakers enough distance from the TV so that they do not cause color irregularity on the TV.

3.Wait for about 30 minutes before turning on the main power of the TV again.

The speakers employ natural wood for the diaphragm and the cabinet in order to reproduce the original sound faithfully.

The appearance will therefore be different for each system.

You can detach the speaker cover.

Speaker cover

NOTE

•To allow the receiver and the DVD player to emit generated heat, leave a space of at least 1 cm between the receiver or the DVD player and the speakers or other objects.

9