Begin Source Playback, Before the scene | JVC GV-PT2 instruction

							EN 25
							BEGIN SOURCE PLAYBACK
Image stored			Display of stored position			4 Fast-forward or rewind the source tape to find
			Display of stored position				the desired scene, then start playback a little
							the desired scene, then start playback a little
							before the scene.

5 PRESS MEMORY WHEN THE DE- SIRED IMAGE APPEARS

•The image is stored in memory and appears in the upper lefthand corner of the screen.

•The next position to be stored in memory appears in all white in the upper righthand corner of the screen.

•You can select which position to store next by pressing the cursor buttons / and / .

•With ON SCREEN set to OFF on the PRINTER MENU (Page 20), only the position stored in memory appears on the display.

6 PRESS SOURCE TO CALL UP THE INPUT DISPLAY

7 REPEAT STEPS 5 AND 6 FOR EACH IMAGE YOU ARE GOING TO PRINT (4 OR 16) AND STORE THEM

8 PRESS PRINT

•Print Lamp blinks, indicating that printing has started.

•“Now printing!!” appears on screen during printing.

•When the printed sheets are delivered to the output tray and “Now printing!!” disappears, printing is complete. Do not leave more than 25 printed sheets stacked on the tray.

FRAME STABILISER

If MEMORY display is not stable, press FRAME STABILISER button to call up “F.STABILISER” on TV screen.

If you store the wrong image or store an image incorrectly ...

1Press the cursor buttons / and / , and select the image you want to change.

●The position stored appears in white in the upper righthand corner of the screen. 2Press SOURCE to call up the INPUT display and store a new image.

●The wrong image is deleted and the new image is stored in memory.

Image 26

JVC GV-PT2 manual Begin Source Playback, Fast-forward or rewind the source tape to find, Before the scene

Contents

GV-PT2 Safety Precautions Some Dos And Donts On The Safe Use Of Equipment Above ALL About Thermal Heads Strobe Print Inset PrintTitle Impose Print Editing Index Layout Print BUILT-IN Capture Facility Contents Floppy Disk Paper Tray Blank Paper Sheet Set RemoteControl Unit @ S-Video Input Connector Error lamp INK lampRemote Control Signal Receiver Remote Pause connector # Video Input Connector Jlip Joint Level Interface Protocol Connector Parallel ConnectorService Door for Jammed Paper Removal Video Output Connector Menu control button Cursor control button OK button 10 ENTransmitter Source select button Title button Use two R6 batteries Place two R6 batteriesCompartment. Align the batteries as shown EN C Onnections Image source with Video output connectors When removing ink cassette 14 EN SET Contents Uses About Blank Paper Sheet Sets optional Loading/unloading the paper tray Opening the paper trayInserting blank paper sheets in the paper tray Open the lid while pushing a Preparation EN Press OK PreparationSelect Layout and NO. of Scenes Press Print Press Memory When the DE- Sired Image AppearsTo print a live image using a camcorder as the source If you store the wrong image or store an image incorrectly Press Menu Setting with remote control unitPrint menu display Select Layout Press Format 22 ENMulti-Print Same Scene Now printing!! appears on screen during Print Lamp blinks, indicating that printingHas started Printing 24 EN Multi-Print Different Scenes Desired scene, then start playback a little Begin Source PlaybackFast-forward or rewind the source tape to find Before the scene 26 EN Press ModeMode Select Menu appears on the monitor Multi-Print Different Scenes Sticker Type Print Title Impose Print is not available Press Memory When the Desired Image AppearsTo exit Editing Index mode If you store a wrong image or store an image incorrectly Store the main scene 28 ENInset Print Select Horizontal on Layout and Select OFF on Multi If you store the wrong main scene Select 4 or 16 on Multi and Select Different on ContentStore the sub scene If you store the wrong sub scene 30 EN Strobe Print Press Memory When the DE- Sired Image Appears Select Vertical on Layout 32 ENVertical Layout Print Image to be stored Selectout Video Cassette on LAY 34 ENVideo Cassette Label Print Press cursor buttons / to choose the options To affix labels on video cassettes First cut out the labels and then stick onto video cassettes 36 EN Name Sticker Print Press Memory When the DE- Sired Image Appears Store the Desired Image in Memory 38 ENCalendar Print If you store the wrong calendar SET YEAR/MONTH of CalendarPress OK Button Connect Image Source Camcorder or VCR to Printer page 12 40 ENEditing Index SET EDIT-IN or EDIT-OUT Point of the Scene to be Stored Choose Editing Index Sequence for memory 42 EN Snapshot Print Shot Button Select Snap Shot PrintingPress the CAMCORDER’S Snap Record Title or Drawing with Your Camcorder 44 ENTitle Impose Print If you want to change the title Erase title when printing is finishedChoose NEGATIVE/POSITIVE of the Title If you want to change Colour or Shooting a pattern Using The Attached Collection Of Superimpose Patterns46 EN Personal Computer Printer Section EN Introd Uction Bi-Directional 25-pin printer interface 486DX2 or higher CPU Image EditFormat Window To Video Output connector To S-VIDEO Video cable option Rear panel jack To Video Connector Printer Front panel jackTo S-VIDEO Input connector To Video Input connector Personal Computer Setting up EN INS T Alling T HE Software Run 54 EN Windows 3.1 offers a number of ways to launch an application Closing the Program Maximize button Each menu is configured as shown below 56EN Rotate 90 clockwise Arrange Icons 58 ENTile Cascade Printing Procedure Press OK 60 EN Example Call up the printer setup display setup dialog To start printing Cancel Print orientation Select when printingImage adjustment No. of prints Print orientation File name box Message box Displays the current status Control button 64 EN Paper jammed PC mode is selectedVideo printer mode Close back door 66 EN Selected. Switch to To the PC modeCapture mode is PC mode 68 EN If no paper is jammed in the output tray If no paper is jammedSlot of the paper tray Signal PowerPower consumption Connectors Layout Error MessagesPg ,23-43 Pg ,43,59 MEM O Memo GV-PT2