Image on the TV monitor
The area within the broken line is stored in memory.
EN 19
5 PRESS MEMORY WHEN THE DE- SIRED IMAGE APPEARS
•The image is stored in memory and appears on the screen.
•If MEMORY display is unstable, press FRAME STABILISER button to call up “F.STABILISER” on TV screen to stabilize the frame.
6 PRESS PRINT
•Print Lamp blinks, indicating that printing has started.
•“Now printing!!” appears on screen during printing.
•When the printed sheets are delivered to the output tray and “Now printing!!” disappears, printing is complete. Do not leave more than 25 printed sheets stacked on the tray.
When printed on
Output tray
Print lamp
If you want to switch between the input image and the stored image ...
press SOURCE. Each time you press the button, the displayed image alternates between the input image and the stored image. This function is not available during printing.
If you store the wrong image or store an image incorrectly ...
press SOURCE to call up the INPUT display, then find the correct image and store it in memory. The incorrect image will be deleted and the new image be stored.
FRAME STABILISER
With a “squeezed” video input signal, switching between ON/OFF of FRAME STABILISER is not available. Enter the pause mode on the video unit, make sure that there is no noise or fluctuation on the frame and store the scene in memory.
If you want to print multiple copies of the same scene ...
select the number of print copies on the PRINTER MENU screen. You can select up to 25 copies (page 20). When printing two or more copies, you can press the CANCEL button on the remote control unit at any time to stop print operation after finishing the currently printing page. “Remaining sheets: 5” appears on the monitor screen.
To print a “live” image using a camcorder as the source ...
in step 4, instead of playing back the source tape, engage the camcorder’s Record mode.
