64 EN | JVC GV-PT2 manual

64EN

TROUBLESHOOTING

WHAT TO DO IF ANY OF THE MESSAGES BELOW APPEAR

VIDEO PRINTER MODE

	Message	⬤ Appears when:	Page
	Message	⬛ Action:	Page
		⬛ Action:
	Please wait.	⬤ Power is turned on.
		⬤ Printer internal temperature rises. The message	—
		may remain for about 3 minutes until the printer	—
		may remain for about 3 minutes until the printer
		has cooled down.
	Set ink cassette and	⬤ Ink cassette not set or improperly set.
	close cover.	⬛ Insert the ink cassette until it clicks and close the	14
		cover.
	Set paper tray.	⬤ Paper tray is not inserted correctly.	16
		⬛ Place blank paper sheets on the paper tray and	16
		insert it correctly.
	Open output tray.	⬤ Output tray is closed.	8
		⬛ Open the output tray.	8
		⬛ Open the output tray.
	Paper is not compat-	⬤ Print sheets are not compatible with the ink
	ible with ink	cassette model or the print paper orientation is
	cassette.	wrong.	69
	Open back door and	⬛ Open the jammed paper removing door and
	remove paper.	remove the jammed sheet. Make sure that the	15
		blank paper sheets are compatible with the ink
		cassette model.
	Pull out paper tray	⬤ Paper tray is running out of paper or paper feed is
	and check paper.	not working improperly.	16
		⬛ Remove the paper tray and correctly set print	16
		⬛ Remove the paper tray and correctly set print
		sheets.
	Replace ink cassette.	⬤ Ink cassette is consumed.
	Pull out paper tray	⬛ Replace with a new one.	14
	and check paper.
	Now printing!!	⬤ During printing.	—
	Number of sheets: 1		—
	Number of sheets: 1

Image 65

JVC GV-PT2 manual 64 EN

Contents

GV-PT2 Safety Precautions Above ALL Some Dos And Donts On The Safe Use Of Equipment About Thermal Heads Title Impose Print Inset PrintStrobe Print Editing Index BUILT-IN Capture Facility Layout Print Contents Floppy Disk Paper Tray Blank Paper Sheet Set RemoteControl Unit Remote Control Signal Receiver Remote Pause connector Error lamp INK lamp@ S-Video Input Connector # Video Input Connector Service Door for Jammed Paper Removal Parallel ConnectorJlip Joint Level Interface Protocol Connector Video Output Connector Menu control button Cursor control button OK button 10 ENTransmitter Source select button Title button Use two R6 batteries Place two R6 batteriesCompartment. Align the batteries as shown EN C Onnections Image source with Video output connectors 14 EN When removing ink cassette About Blank Paper Sheet Sets optional SET Contents Uses Inserting blank paper sheets in the paper tray Opening the paper trayLoading/unloading the paper tray Open the lid while pushing a Preparation EN Press OK PreparationSelect Layout and NO. of Scenes To print a live image using a camcorder as the source Press Memory When the DE- Sired Image AppearsPress Print If you store the wrong image or store an image incorrectly Press Menu Setting with remote control unitPrint menu display Select Layout Press Format 22 ENMulti-Print Same Scene Has started Print Lamp blinks, indicating that printingNow printing!! appears on screen during Printing Multi-Print Different Scenes 24 EN Fast-forward or rewind the source tape to find Begin Source PlaybackDesired scene, then start playback a little Before the scene Mode Select Menu appears on the monitor Press Mode26 EN Multi-Print Different Scenes Sticker Type Print To exit Editing Index mode Press Memory When the Desired Image AppearsTitle Impose Print is not available If you store a wrong image or store an image incorrectly Inset Print 28 ENStore the main scene Select Horizontal on Layout and Select OFF on Multi Store the sub scene Select 4 or 16 on Multi and Select Different on ContentIf you store the wrong main scene If you store the wrong sub scene Strobe Print 30 EN Press Memory When the DE- Sired Image Appears Select Vertical on Layout 32 ENVertical Layout Print Image to be stored Video Cassette Label Print 34 ENSelectout Video Cassette on LAY Press cursor buttons / to choose the options First cut out the labels and then stick onto video cassettes To affix labels on video cassettes Name Sticker Print 36 EN Press Memory When the DE- Sired Image Appears Store the Desired Image in Memory 38 ENCalendar Print If you store the wrong calendar SET YEAR/MONTH of CalendarPress OK Button Editing Index 40 ENConnect Image Source Camcorder or VCR to Printer page 12 SET EDIT-IN or EDIT-OUT Point of the Scene to be Stored Sequence for memory Choose Editing Index Snapshot Print 42 EN Shot Button Select Snap Shot PrintingPress the CAMCORDER’S Snap Record Title or Drawing with Your Camcorder 44 ENTitle Impose Print Choose NEGATIVE/POSITIVE of the Title Erase title when printing is finishedIf you want to change the title If you want to change Colour or Shooting a pattern Using The Attached Collection Of Superimpose Patterns46 EN Personal Computer Printer Section Bi-Directional 25-pin printer interface 486DX2 or higher CPU EN Introd Uction Format EditImage Window Video cable option To Video Output connector To S-VIDEO To S-VIDEO Input connector To Video Input connector Connector Printer Front panel jackRear panel jack To Video Personal Computer EN INS T Alling T HE Software Setting up Run Windows 3.1 offers a number of ways to launch an application 54 EN Maximize button Closing the Program 56EN Each menu is configured as shown below Rotate 90 clockwise Arrange Icons 58 ENTile Cascade Press OK Printing Procedure Example 60 EN To start printing Call up the printer setup display setup dialog Image adjustment Print orientation Select when printingCancel No. of prints Print orientation Message box Displays the current status Control button File name box 64 EN Video printer mode PC mode is selectedPaper jammed Close back door 66 EN Capture mode is To the PC modeSelected. Switch to PC mode 68 EN If no paper is jammed in the output tray If no paper is jammedSlot of the paper tray Power consumption PowerSignal Connectors Pg ,23-43 Error MessagesLayout Pg ,43,59 MEM O Memo GV-PT2