To affix labels on video cassettes | JVC GV-PT2 instruction

EN 35

4 BEGIN SOURCE PLAYBACK Fast-forward or rewind the source tape to find the desired scene, then start playback a little before the scene.

5 PRESS MEMORY WHEN THE DE- SIRED IMAGE APPEARS

•The desired scene is stored in memory and appears on screen.

•While the MEMORY screen shows one image, the actual print looks as illustrated on the opposite page.

•In order to print characters on the spine label of the cassette, see the Title Impose Print section on page 44.

Output tray	6	PRESS PRINT
Print lamp	6	•Print Lamp blinks, indicating that printing
Print lamp		has started.
		•“Now printing!!” appears on screen during
		printing.
		•When the printed sheets are delivered to the
		output tray and “Now printing!!” disappears,
		printing is complete. Do not leave more
		than 25 printed sheets stacked on the tray.

FRAME STABILISER

Switching between ON/OFF of FRAME STABILISER is not available in the Video Cassette Label Print mode.

To affix labels on video cassettes ...

First cut out the labels and then stick onto video cassettes.

Image 36

JVC GV-PT2 manual To affix labels on video cassettes, First cut out the labels and then stick onto video cassettes

Contents

GV-PT2 Safety Precautions Some Dos And Donts On The Safe Use Of Equipment Above ALL About Thermal Heads Inset Print Title Impose PrintStrobe Print Editing Index Layout Print BUILT-IN Capture Facility Contents Paper Tray Blank Paper Sheet Set Remote Control UnitFloppy Disk Error lamp INK lamp Remote Control Signal Receiver Remote Pause connector@ S-Video Input Connector # Video Input Connector Parallel Connector Service Door for Jammed Paper RemovalJlip Joint Level Interface Protocol Connector Video Output Connector 10 EN Transmitter Source select button Title buttonMenu control button Cursor control button OK button Place two R6 batteries Compartment. Align the batteries as shownUse two R6 batteries EN C Onnections Image source with Video output connectors When removing ink cassette 14 EN SET Contents Uses About Blank Paper Sheet Sets optional Opening the paper tray Inserting blank paper sheets in the paper trayLoading/unloading the paper tray Open the lid while pushing a Preparation EN Preparation Select Layout and NO. of ScenesPress OK Press Memory When the DE- Sired Image Appears To print a live image using a camcorder as the sourcePress Print If you store the wrong image or store an image incorrectly Setting with remote control unit Print menu displayPress Menu Select Layout 22 EN Multi-Print Same ScenePress Format Print Lamp blinks, indicating that printing Has startedNow printing!! appears on screen during Printing 24 EN Multi-Print Different Scenes Begin Source Playback Fast-forward or rewind the source tape to findDesired scene, then start playback a little Before the scene Press Mode Mode Select Menu appears on the monitor26 EN Multi-Print Different Scenes Sticker Type Print Press Memory When the Desired Image Appears To exit Editing Index modeTitle Impose Print is not available If you store a wrong image or store an image incorrectly 28 EN Inset PrintStore the main scene Select Horizontal on Layout and Select OFF on Multi Select 4 or 16 on Multi and Select Different on Content Store the sub sceneIf you store the wrong main scene If you store the wrong sub scene 30 EN Strobe Print Press Memory When the DE- Sired Image Appears 32 EN Vertical Layout PrintSelect Vertical on Layout Image to be stored 34 EN Video Cassette Label PrintSelectout Video Cassette on LAY Press cursor buttons / to choose the options To affix labels on video cassettes First cut out the labels and then stick onto video cassettes 36 EN Name Sticker Print Press Memory When the DE- Sired Image Appears 38 EN Calendar PrintStore the Desired Image in Memory SET YEAR/MONTH of Calendar Press OK ButtonIf you store the wrong calendar 40 EN Editing IndexConnect Image Source Camcorder or VCR to Printer page 12 SET EDIT-IN or EDIT-OUT Point of the Scene to be Stored Choose Editing Index Sequence for memory 42 EN Snapshot Print Select Snap Shot Printing Press the CAMCORDER’S SnapShot Button 44 EN Title Impose PrintRecord Title or Drawing with Your Camcorder Erase title when printing is finished Choose NEGATIVE/POSITIVE of the TitleIf you want to change the title If you want to change Colour or Using The Attached Collection Of Superimpose Patterns 46 ENShooting a pattern Personal Computer Printer Section EN Introd Uction Bi-Directional 25-pin printer interface 486DX2 or higher CPU Edit FormatImage Window To Video Output connector To S-VIDEO Video cable option Connector Printer Front panel jack To S-VIDEO Input connector To Video Input connectorRear panel jack To Video Personal Computer Setting up EN INS T Alling T HE Software Run 54 EN Windows 3.1 offers a number of ways to launch an application Closing the Program Maximize button Each menu is configured as shown below 56EN Rotate 90 clockwise 58 EN Tile CascadeArrange Icons Printing Procedure Press OK 60 EN Example Call up the printer setup display setup dialog To start printing Print orientation Select when printing Image adjustmentCancel No. of prints Print orientation File name box Message box Displays the current status Control button 64 EN PC mode is selected Video printer modePaper jammed Close back door 66 EN To the PC mode Capture mode isSelected. Switch to PC mode 68 EN If no paper is jammed Slot of the paper trayIf no paper is jammed in the output tray Power Power consumptionSignal Connectors Error Messages Pg ,23-43Layout Pg ,43,59 MEM O Memo GV-PT2