16
CONTROLS, INDICATORS AND CONNECTORS
Left Side Section
1[DC INPUT] DC connector
Power input for 7.2 V DC accepts the supplied AC adapter.
XSee “AC Operation” on page 32.
2[LINE OUTPUT] Line output connector (Φ3.5mm)
Output connector for audio signals.
• Outputs the input audio signal in the Camera mode.
• Outputs the playback audio signal in the VTR mode.
• When a HDV/DV signal (IEEE1394) is input, the EE
sound of the input audio signal is output in the VTR
mode. (GY-HD110U/GY-HD111E only)
MEMO
Alarm sound is not output.
3[IEEE1394] IEEE1394 switch
Input/output signal and playback signal video from the
IEEE1394 connector 4. Set this switch according to the
format.
4[IEEE1394] IEEE1394 connector (6-pin)
Using an IEEE1394 cable (optional), a digital video compo-
nent with IEEE1394 connector can be connected here.
XSee “Connecting the IEEE1394 Cable” onpage 56.
XSee “HDV/DV Dubbing” on page 58.
5[VIDEO/Y, PB, PR] Video Signal Output Connectors
(RCA)
These are connectors for component or composite video
signal output.
The signal switches automatically depending upon the
cables connected to these connectors.
• You can select the output signal using the OUTPUT
TERMINAL item on the VIDEO FORMAT menu.
You can also select whether or not to add a setup signal
in the SET UP item. XSee page65.
• When the OUTPUT CHAR. item on the OTHERS [1/2]
menu screen is ON, the menu setting screen is also dis-
played in the video from the video signal output connec-
tor. XSee page80.
XSee “Dubbing with AV Devices” on page 57.
MEMO
Put the covers on the connectors when you are not using
them.
6Cassette cover
Sliding the EJECT switch a on page 17 located on the top
section opens this cover to allow insertion or removal of the
videocassette.
CAUTION
To prevent foreign objects from entering the internal parts of
the VTR unit, do not leave the unit with the cover open for
extended periods of time.
7Viewfinder connector (6-pin)
Connect the cable from the viewfinder here.
8[CH-2 INPUT] CH-2 audio input connector selector
switch
Selects the CH-2 audio input connector.
MEMO
The audio from the INPUT1 connector is also input into
CH-1 regardless of the setting.
9[AUDIO INPUT] Audio input signal selector switch
This switch is used to select the input sound signal from
INPUT1 or INPUT2 connector.
CAUTION
When connecting a component that does not require +48 V
power supply, make sure that the switch is not set to
MIC+48V before the component is connected.
MEMO
You can select the normal input level for MIC and MIC+48V
in the INPUT1, 2 MIC REF. item on the AUDIO/MIC menu
screen.
XSee page 72.
0[INPUT1/INPUT2] INPUT1/INPUT2 audio input connec-
tors
These are audio input connectors for connecting to an
external audio device or microphone.
• Set the [AUDIO INPUT] switch 9 according to the
device to be connected.
• Set the CH-2 audio input connector using the [CH-2
INPUT] switch 8.
The CH-2 audio from the set connector is recorded.
aShoulder pad slide button
Button to adjust the position of the shoulder pad.
When you press this button, you can move the position of
the shoulder pad b forward or backward.
bShoulder pad
HDV : For HDV format
DV : DV format
1
2345 6
7
8
9
0ab INPUT1 : Inputs the audio from the INPUT1 connector
0 into CH-2.
INPUT2 : Inputs the audio from the INPUT2 connector
0 into CH-2.
LINE : Set to this position when connected to audio
equipment, etc. The reference input level is
+4 dBs.
MIC : Set to this position when the dynamic micro-
phone is connected.
MIC+48V : Set to this position when a microphone requir-
ing +48 V power supply (phantom micro-
phone, etc.) is connected.