CONTROLS, INDICATORS AND CONNECTORS
Indications on the LCD Monitor and in the Viewfinder (Cont’d)
When not using an Anton Bauer battery or IDX battery, or when using these batteries and the LCD+VF item in the LCD/ VF [3/3] menu is set to OFF, the LCD monitor and viewfinder (VF) displays are as shown below.
LCD Monitor Status | LCD Display | VF Display | |
LCD Closed | Normal LCD | OFF | ON |
| Inverted LCD | ON | OFF |
LCD Open | Normal LCD | ON | OFF |
DISPLAY button | Inverted LCD | ON | OFF |
| |||
Inverted LCD
Normal LCD
LCDBRIGHT |
|
|
|
| CAM/VTR |
AUDIOSELECT |
|
|
|
| |
DISPLAY | TC | |
AUTO | GENE. | |
MANU | TC | |
| UB | FREE |
|
| REC |
|
| REGEN |
LCD open 40° or more
LCD close less than 40°
When using an Anton Bauer battery or IDX battery and the LCD+VF item in the LCD/VF [3/3] menu is set to ON, the LCD monitor and viewfinder (VF) displays are as shown below.
LCD Monitor Status | LCD Display | VF Display | |
LCD Closed | Normal LCD | OFF | ON |
|
|
|
|
| Inverted LCD | ON | ON |
LCD Open | Normal LCD | ON | ON |
|
|
|
|
| Inverted LCD | ON | ON |
MEMO
•You can switch between the LCD monitor and the view- finder by holding down the DISPLAY button for about 2 seconds.
•After you set up the function that switches the display between the LCD monitor and the viewfinder by holding down the DISPLAY button, the display mode is cancelled by the LCD monitor open/close and normal/inverted oper- ations.
•If the LCD monitor is closed inside the camcorder with the screen in the normal display orientation, holding down the DISPLAY button does not work.
•You can set the LCD monitor and viewfinder to display simultaneously by selecting the VF+LCD item in the LCD/ VF [3/3] menu display.
(Only when this unit is being operated with an Anton Bauer battery or IDX battery)
X See page 76.
28
