OTHERS

Warnings and Responses

Warnings are displayed on the LCD monitor or the viewfinder if there was a mistaken operation, if the battery or tape is low, or if there is a problem on the VTR.

In addition, if the tape or battery is low or the VTR has a problem, the tally lamp flashes (or lights) and an alarm is output from the monitor speaker or PHONES jack.

MEMO

This camcorder uses microcomputers. It may not operate properly if there is external static or interference. If this happens, turn the power off and then on again.

Display

Status

Action

60/30 24 INHIBIT

The FRAME RATE item is set to 50/25, and a tape record-

Sets the FRAME RATE item on the VIDEO FORMAT menu

CHANGE FRAME

ed in 60/30, 24 frame HDV format is played back or it is in-

screen to match the frames.

RATE MENU

put into the IEEE1394 port in VTR mode.

X See page 64.

60/30 INHIBIT

The FRAME RATE item is set to 50/25, and a tape record-

 

CHANGE FRAME

ed in 60/30 frame DV format is played back or it is input into

 

RATE MENU

the IEEE1394 port in VTR mode.

 

 

 

 

50/25 INHIBIT

The FRAME RATE item is set to 60/30 or 24, and a tape re-

 

CHANGE FRAME

corded in 50/25 frame HDV/DV format or it is input into the

 

RATE MENU

IEEE1394 port in VTR mode.

 

 

 

 

24 INHIBIT CHANGE

The FRAME RATE item is set to 50/25 and, a tape record-

 

FRAME RATE MENU

ed in 24 frame DV format is played back or it is input into

 

 

the IEEE1394 port in VTR mode.

 

DV-60I INVALID!

A tape recorded in DV-60I, DV-24P, or DV-24PA format

The E model cannot play back tapes recorded in DV-60I,

DV-24P INVALID!

was played back or input into the IEEE1394 connector in

DV-24P or DV-24PA format or input into the IEEE1394 con-

DV-24PA INVALID!

VTR mode on the E model.

nector in VTR mode.

 

 

 

DV-50I INVALID!

A tape recorded in DV-50I or DV-25P format was played

The U model cannot play back tapes recorded in DV-50I or

DV-25P INVALID!

back or input into the IEEE1394 connector in VTR mode on

DV-25P format or input into the IEEE1394 connector in

 

the U model.

VTR mode.

INVALID TAPE!

A computer data tape or a DVC PRO cassette was used.

Use a MiniDV videocassette.

 

 

 

LP TAPE INVALID!*

Tried to play back a tape recorded in LP mode.

This camcorder cannot record or play back in LP mode.

 

 

 

NO DV SIGNAL*

DV signal was not input.

Set the IEEE1394 switch to DV and input a DV signal.

 

 

 

NO HDV SIGNAL*

HDV signal was not input.

Set the IEEE1394 switch to HDV and input an HDV signal.

 

 

 

COPY INHIBIT*

Tried to record a copyguarded signal.

Cannot record a copyguarded signal.

 

 

 

REC INHIBIT*

A tape that cannot be recorded (back switch is set to SAVE)

Set the switch on the back of the cassette tape to REC.

 

was inserted.

 

NO TAPE*

No videocassette tape is inserted.

Insert a cassette tape.

 

 

 

LOW VOLTAGE*

Battery is low.

Charge the battery pack or replace it.

 

 

 

TAPE NEAR END*

There are less than 3 minutes remaining on the tape (flash-

To continue shooting, find a new tape or replace the tape.

 

es only when recording).

 

TAPE END*

Displayed when the tape ends.

Replace the tape.

 

 

 

CHANGE 1394

Recording or playback video format and the IEEE1394 set-

Set the IEEE1394 switch correctly, turn the power off and

SWITCH*

ting is different when connected to the IEEE1394 port.

then on again.

SWITCH TO VTR

Tried to use the FF or REW button in camera mode.

Press the CAM/VTR button to set VTR mode.

MODE*

 

 

HEAD CLEANING

Displayed when the video head is dirty. (Head clogging was

Clean with a special head cleaning tape.

REQUIRED

detected during an edit search in shooting mode as well as

X See page 7.

 

during playback and displayed.)

 

 

 

 

CLEANING TAPE!

Displayed when a head cleaning tape is inserted.

The display disappears when the head cleaning tape is re-

 

 

moved.

COPY GUARD!*

Tried to play back a copyguarded tape.

Cannot play back a copyguarded tape.

 

 

 

FAN MOTOR HOUR

Over the prescribed fan motor usage time.

Please contact your local dealer or JVC.

 

 

 

PUSH CASSETTE

The videocassette cover is not firmly shut.

Lightly push the top center of the videocassette cover.

COVER*

 

 

*When status indications are magnified, warnings are not displayed on the LCD monitor. X See “Magnified Status Indications on the LCD Monitor” on page 26.

89

Page 85
Image 85
JVC GY- HD111 HD CAMERA RECORDER manual Others, Display Status Action