30
PREPARATIONS
Attaching the Zoom Lens
1. Loosen the mount ring.
2. Attach the lens with its pin aligned with the hole in the
mount.
3. Tighten the mount ring.
4. Connect the cable connector.
5. Clamp the lens cable.
CAUTION
• Be sure to tighten the mount ring completely. Incomplete
tightening may result in the lens dropping off or disturbed
back focus.
• Set the GY-HD110’s power switch to “OFF” before the
zoom lens is attached or detached.
Attaching the Microphone (Provided)
Connect the provided microphone to the microphone holder.
Provided microphone is a phantom microphone.
1. Turn the knob on the microphone holder anticlockwise to
loosen it and open the microphone holder.
2. Place the microphone in the microphone holder.
Place the microphone toward the front to prevent it from
interfering with the cassette cover.
3. Turn the knob on the microphone holder clockwise to
secure the microphone.
4. Connect the microphone cable to the INPUT1 or INPUT2
input connector on the GY-HD110.
5. Attach the microphone cable to the clamp.
6. Make sure to perform the correct setting for use of a phan-
tom microphone.
XSee page 48.
How to Attach the Viewfinder
To attach the viewfinder, slide it in the direction of the arrow.
To take off the viewfinder, pull the knob in the direction of the
arrow as you slide the viewfinder.
Pin
Hole
Clamp
1. 3. Knob 2. Microphone
Microphone
holder
5. Clamp
4. INPUT1, 2 connector
Knob
Taking off the viewfinder