OTHERS

„TALLY lamp

Blinks when remaining battery power or tape is low. (Only in Camera mode)

Blinking Pattern

Remaining Battery/Tape

Slow blinking

• Remaining battery power is low.

(once per sec.)

• Remaining tape time is equivalent to less

 

than 3 minutes.

Fast blinking

• Tape has run out.

(four times per sec.)

• Irregularity has occurred in the VTR.

„Alarm Sound

When remaining battery power becomes low, a warning sound is output from the monitoring loudspeaker and the PHONES jack.

(In Camera mode only)

When an irregularity occurs in the VTR, a warning sound is also output.

Whether or not alarm sound should be output and the vol- ume level are selected with the ALARM VR LEVEL item on the OTHERS [1/2] menu screen.

„Depending on the alarm conditions, the warning indicators on the LCD monitor/viewfinder screen, the TALLY lamp, and alarm sounds appear as shown in the following table.

Alarm Indications on LCD Monitor/

TALLY lamp

Alarm Sound

Condition

Viewfinder Screen

 

 

 

VTR alarm indication

 

 

Dew formation (condensation) or error has oc-

(Example)

I

 

curred in the VTR.

 

 

 

 

J

 

About 3 min. before tape end

 

 

(displayed during recording).

 

I

 

Tape end

 

 

(displayed during recording).

 

J

 

Remaining battery power is low.

 

 

 

Display symbols

J

: Blinking once per second.

 

 

: Sound interrupted once per second.

I: Blinking four times per second. : Continuous sound.

91

Page 87
Image 87
JVC GY- HD111 HD CAMERA RECORDER manual Blinking Pattern Remaining Battery/Tape, Viewfinder Screen