Activate VARIABLE-SPEED Search, High-Speed Search | JVC HR-J631T

SHUTTLE

6

q

PLAY

1 2 3

4

5

6

7 8 9

0

FF

REW

PUSH JOG

15

Variable-Speed Search/

Reverse Play

ACTIVATE VARIABLE-SPEED

SEARCH

1 During playback or still, turn the SHUTTLE ring to the right for forward variable-speed search, or to the left for reverse variable-speed search (refer to the illustration on page 14).

OR

During playback, press PUSH JOG ª or £.

●To increase the speed in the forward direction, press £.

●To decrease the speed in the forward direction, press ª.

●To play in reverse slow motion, and in reverse play mode, continue to press ª after selecting all the forward slow motion modes.

To resume normal playback, press PLAY.

High-Speed Search

ACTIVATE HIGH-SPEED

SEARCH

1 During playback or still, turn the SHUTTLE ring all the way to the right for forward high-speed search, or to the left for reverse high-speed search.

●For forward search with a visible picture, during playback or still turn the SHUTTLE ring all the way to the right and release it within 1 second.

●For reverse search with a visible picture, during playback or still turn the SHUTTLE ring all the way to the left and release it within 1 second.

OR

During playback or still press FF for forward high-speed search, or REW for reverse high-speed search.

To resume normal playback, press PLAY.

NOTE:

For short searches, during playback or still press and hold FF or REW for over 2 seconds. When released, normal playback resumes.

Image 15

JVC HR-J631T manual Activate VARIABLE-SPEED Search, Activate HIGH-SPEED Search, Variable-Speed Search Reverse Play

Contents

HR-J631T Do not place the VCR Dear Customer Contents Situate VCR Check ContentsConnect VCR to Power Source Basic Connections Clock Tuner Perform Auto Channel SET Return to Normal Screen Access Tuner SET ScreenAccess AFC Screen Store Desired Channel Access Main Menu Screen Code Setup Access G-CODE SET-UP Screen Access Guide Channel SET ScreenInput Guide Channel Number Return to G-CODE SET UP Screen NumberReturn to Normal Start Playback Simple PlaybackLoad a Cassette Find Program Start Point Simple Recording Still Picture/Frame-By- Frame Playback Pause During PlaybackActivate FRAME-BY Frame Playback Playb a CK and Recording Feat Ures High-Speed Search Activate VARIABLE-SPEED SearchActivate HIGH-SPEED Search Variable-Speed Search Reverse Play Tracking Tracking ModeAdjust Manual Engage Manual Access Function SET Select The SoundtrackMix Superimpose Playback and Recording Features Stop Repeat Access Distant CodeSkip Over Unwanted Sections Start Repeat Return to Counter Position Zero Activate Instant ReviewActivate Counter Memory Next-Function Memory Tape Position IndicatorRelation to B Beginning or E End shows you where you are on Press REW, then press Timer within 2 seconds Picture System Preparation Select Mode Begins with the picture Level optimized RecordingPress and hold REC Quality of the tape Use, then recording Playback Before beginning, perform steps 1 and 2 onTape in use Select Channel for Viewing Engage TV ModeReset Counter to Zero Recording To Record Stereo Programs Access 2ND AudioStereo And SAP Second Audio Program To Record SAP Programs SET Recording Duration Instant Timer Recording ITREngage ITR Mode Timer Recording Check Input Data Code Timer ProgrammingAccess G-CODE Screen Enter G-CODE Number CHECK/CORRECT Input Data Engage Timer ModePress just once to access the Auto Timer screen Press TIMER. The VCR turns off automatically Information On-Screen Timer ProgrammingSelect Program SET Program To 100 PM in SP mode, If you program the VCR to timerRecord a show on September On channel 40 from 1200 noon RE-ENGAGE Timer Disengage TimerAccess Program SET Screen Cancel a Program Access Function SET Screen Auto SP/EP TimerPlace the arrow next to your choice on or OFF by press CH5 Auto Timer Access Auto Timer SET TV Brand Code SET Remote ControlTurn on the TV Mode Make Connections SET RECORDER’S Input ModeAccess AUX Input Screen Edit From a Camcorder Start Recorder Start Player Player Your VCR Edit To Or From AnotherLoad Cassettes Control Two JVC VCRs Start Dubbing SET Input ModeLocate Start Point Engage Audio Dubbing Remote control won’t function Batteries are discharged Cassette gets stuck partwayMake sure the window side is up, Re-perform the G-Code setup Doesn’t work properly Timer again Playback Questions and Answers Maximum recording time EIA monochrome signalSpeci Fications 20C to 60C -4F to140F Index Front View Front Display Panel Remote Control Provided HR-J631T