JVC HR-J631T If you program the VCR to timer, Record a show on September, To 100 PM in SP mode

OK MENU

6

q

CH

1 2 3

4 5 6

7 8 9

31

6	MAKE CORRECTIONS
	To change any of the settings, press OK or PUSH JOG
	ª £ until the item you want to change begins
	blinking. Then set as in step 5.
	RETURN TO NORMAL
7	SCREEN
	Press MENU as many times as necessary.
	● Press just once to access the Auto Timer screen
	(☞ pg. 34).
8	ENGAGE TIMER MODE
	Press TIMER. The VCR turns off automatically.

NOTES:

● To disengage the timer before recording starts, press TIMER

again. Pressing once more re-engages it.

● In case of a power failure after programming, the VCR’s

memory backup keeps your selections for 18 hours.

● Backup time becomes shorter as the unit's internal parts

become old. When this occurs, please consult your nearby

JVC dealer.

0

OK

TIMER

MENU

● If you select "PROGRAM SET" without having set the date and

time, an error message appears. Follow its instructions.

● If you enter a start time that has already passed, "ERROR"

appears on the screen and flashes.

● Programs that start after midnight must have the next day’s date.

● After timer recording is completed, the VCR’s power goes off

automatically.

● You can program the timer while a regular recording is in

progress; the on-screen menu will not be recorded.

● If the end of tape is reached during timer recording, the

cassette is automatically ejected.

PUSH JOG

EXAMPLE
If you program the VCR to timer	PROGRAM 1
record a show on September 6
	DATE	9/ 6 FRI
on channel 40 from 12:00 noon
to 1:00 PM in SP mode, the	START	12:00 PM
	STOP	1:00 PM
screen will look like this:	CHANNEL	40 SP

PRESS NUMBER KEY(0-9) OR (5,°), THEN (OK)

PRESS (MENU) TO END