Code Timer Programming, Access G-CODE Screen | JVC HR-J631T specs

G-CODE

PRESS NUMBER KEY(0-9)

PRESS (MENU) TO MAIN MENU

28TIMERRECORDING(cont.)

G-Code Timer Programming

Before G-Code Timer programming, see "G-Code Setup" on page 9.

OK

6

q

1

2

3

LOAD A CASSETTE

Make sure the record safety tab is present.

●The VCR’s power comes on automatically.

●If you’re watching on channel 13, press TV/VIDEO to select the VIDEO mode. VIDEO is displayed on the front display panel.

ACCESS G-CODE SCREEN

Press MENU on the remote control.

●The clock must be set in order to access the G- Code screen. If you

haven’t set the clock, the Main Menu screen appears when you press

MENU. Refer to page 5 for the clock setting proce- dure.

ENTER G-CODE NUMBER

Press the appropriate NUMBER keys to enter the G-Code number printed in the TV listings for the TV program you wish to record.

SP/EP

TV/VIDEO
	1		2	3
NUMBER	4		5	6
NUMBER
	7		8	9
CANCEL		"8"	0
CANCEL
	NUMBER
	NUMBER
				OK

NUMBER "9"

MENU

TV/VCR

4

5

●To make corrections, press CANCEL and input the correct G-Code number.

●If the G-Code number you input is incorrect, "ERROR" may appear on the screen to advise you of the error. This happens when the G-Code number is for a program which has already passed. "ERROR" is displayed for about 4 seconds and the G-Code screen reappears (step 2).

CHECK INPUT DATA

	Press OK and the Program	PROGRAM 1
	screen appears.	PROGRAM 1
	screen appears.	(G-CODE 12345678)
	The G-Code number you	DATE	7/10 WED
	entered appears in the	START	8:00 PM
	entered appears in the	STOP	9:00 PM
	Program screen. Check to	CHANNEL	8 SP

	make sure it’s accurate.	PRESS (8=DAILY, 9=WEEKLY
		SP/EP=REC SPEED)
	● To timer-record daily or	SP/EP=REC SPEED)
	● To timer-record daily or	PRESS (MENU) TO END
	weekly serials, press

DAILY (NUMBER “8”) or WEEKLY (NUMBER “9”). “DAILY” or “WEEKLY” appears on the Program screen.

●If you made a mistake, press CANCEL and, after pressing MENU as many times as necessary to access the G-Code screen, input the correct G-Code number.

SET TAPE SPEED

Press SP/EP.

Image 28

JVC HR-J631T manual Code Timer Programming, Access G-CODE Screen, Enter G-CODE Number, Check Input Data

Contents

HR-J631T Dear Customer Do not place the VCR Contents Check Contents Connect VCR to Power SourceBasic Connections Situate VCR Clock Tuner Perform Auto Channel SET Access Tuner SET Screen Access AFC ScreenStore Desired Channel Return to Normal Screen Code Setup Access Main Menu Screen Access Guide Channel SET Screen Access G-CODE SET-UP ScreenInput Guide Channel Number Number Return to G-CODE SET UP ScreenReturn to Normal Simple Playback Load a CassetteFind Program Start Point Start Playback Simple Recording Pause During Playback Activate FRAME-BY Frame PlaybackPlayb a CK and Recording Feat Ures Still Picture/Frame-By- Frame Playback Activate VARIABLE-SPEED Search Activate HIGH-SPEED SearchVariable-Speed Search Reverse Play High-Speed Search Tracking Mode Adjust ManualEngage Manual Tracking Select The Soundtrack Access Function SETMix Playback and Recording Features Superimpose Access Distant Code Skip Over Unwanted SectionsStart Repeat Stop Repeat Activate Instant Review Activate CounterMemory Return to Counter Position Zero Tape Position Indicator Relation to B Beginning or E End shows you where you are onPress REW, then press Timer within 2 seconds Next-Function Memory Select Mode Picture System Preparation Recording Press and hold RECQuality of the tape Use, then recording Begins with the picture Level optimized Before beginning, perform steps 1 and 2 on PlaybackTape in use Engage TV Mode Reset Counter to ZeroRecording Select Channel for Viewing Access 2ND Audio Stereo And SAP Second Audio ProgramTo Record SAP Programs To Record Stereo Programs Instant Timer Recording ITR Engage ITR ModeTimer Recording SET Recording Duration Code Timer Programming Access G-CODE ScreenEnter G-CODE Number Check Input Data Engage Timer Mode Press just once to access the Auto Timer screenPress TIMER. The VCR turns off automatically CHECK/CORRECT Input Data On-Screen Timer Programming Select ProgramSET Program Information If you program the VCR to timer Record a show on SeptemberOn channel 40 from 1200 noon To 100 PM in SP mode, Disengage Timer Access Program SET ScreenCancel a Program RE-ENGAGE Timer Auto SP/EP Timer Access Function SET ScreenPlace the arrow next to your choice on or OFF by press CH5 Access Auto Timer Auto Timer SET Remote Control Turn on the TVMode SET TV Brand Code SET RECORDER’S Input Mode Access AUX Input ScreenEdit From a Camcorder Make Connections Start Player Start Recorder Edit To Or From Another Load CassettesControl Two JVC VCRs Player Your VCR SET Input Mode Locate Start PointEngage Audio Dubbing Start Dubbing Cassette gets stuck partway Remote control won’t function Batteries are dischargedMake sure the window side is up, Timer again Re-perform the G-Code setup Doesn’t work properly Questions and Answers Playback EIA monochrome signal Speci Fications20C to 60C -4F to140F Maximum recording time Front View Index Remote Control Provided Front Display Panel HR-J631T