JVC HR-J631T manual Number, Return To G-Code Set Up Screen, Return To Normal, Check Input Data

OK MENU

6

q

CH

	1	2	3
NUMBER	4	5	6
	7	8	9
		0	OK

MENU

CH

		11
	INPUT RECEIVING CHANNEL
7	NUMBER
	Press CH5° or the appropriate NUMBER keys to input
	the number of the channel on which the Guide
	Channel’s broadcasts are received. Then press OK.
	● If there is more than one mismatch, repeat steps 6 and 7
	for each instance.

RETURN TO G-CODE SET-

UP SCREEN

8	Press MENU.
9	CHECK INPUT DATA
	Press CH5° to place the	G-CODE SET-UP
	arrow next to “GUIDE
	CHANNEL MAP”, then	GUIDE CHANNEL SET
	press OK.	=GUIDE CHANNEL MAP
	● The Guide Channel and
	VCR channel numbers	PRESS (5,°), THEN (OK)
	you input appear on the
		PRESS (MENU) TO END
	screen in ascending
	order. Check to ensure	GUIDE CHANNEL MAP
	you’ve entered them	GUIDE : VCR	GUIDE : VCR
	correctly.
	● If you entered more than	6 : 47	10 : 55
		12 : 41	15 : 38
	10 sets of numbers, press	33 : 28	67 : 49
	OK to see the next set of
	numbers.	PRESS (OK) TO NEXT
		PRESS (MENU) TO END
	RETURN TO NORMAL
10	SCREEN
	Press MENU as many times as necessary.

You can now use G-Code for quick and simple timer program- ming (☞ pg. 28).