JVC HR-J631T manual Turn On The Tv, Set Remote Control, Mode, Set Tv Brand Code, Operate Tv

SPECIALFEATURES

35

TV/VIDEO
	1	2	3
NUMBER	4	5	6
	7	8	9
		0

VOL. +/-

STOP

POWER

ENTER

TV/VCR

TV Multi-Brand Remote Control

The VCR's remote control can control several functions on JVC remote control TVs and on the brands of remote control TVs listed below. Some TV brands have more than one code. If the TV will not function with one code, try entering another.

	TURN ON THE TV
1 Turn the power on using the TV's remote control.
	SET REMOTE CONTROL
2	MODE
	Set the TV/VCR switch on the VCR's remote control to
	TV.
	SET TV BRAND CODE
	Refer to the chart below. While holding down POWER,
	enter your TV’s brand code using the NUMBER keys,
3 then press STOP.
	● Once you have set the remote control to operate the
	TV, you don’t have to repeat this step until you
	replace your remote control’s batteries.

OPERATE TV

4 First, press POWER on the remote to see if the TV’s power goes off as it should. If it does, try other operations.

TV BRAND NAME	BRAND CODE
JVC	01
PHILIPS	03
HITACHI	05
SHARP	06
TOSHIBA	07
MITSUBISHI	08
DAEWOO	09, 10
SAMSUNG	11
GOLDSTAR	12
RCA	14
PANASONIC	15, 16
SONY	18

●The POWER, TV/VIDEO, CH5°, VOL +/– and NUMBER keys on the remote can all be used to operate the TV. *For some brands of TV, you must press ENTER after having pressed the NUMBER keys.

●To return the remote to VCR control, set the TV/VCR switch to VCR.

NOTE:

Depending on the kind of TV, there may be cases where some or all functions cannot be operated using the remote control.