JVC HR-J631T Edit From A Camcorder, Make Connections, Set Recorder’S Input Mode, Select Input

AUX INPUT

=FRONT

REAR

PRESS (5,°) TO SELECT

PRESS (MENU) TO END

36

EDITING

Edit From A Camcorder

Recorder	Your VCR
	6
	q
	To rear panel PAUSE
AUDIO	connector
IN	Mini-plug cable (not supplied)
	(JVC camcorder only)

VIDEO IN

VIDEO

OUT

Camcorder AUDIO OUT

EDIT

Player

1	2	3
4	5	6
7	8	9
NUMBER "0"	0

MENU

CH

You can use a camcorder as the player and your VCR as the recorder.

MAKE CONNECTIONS

1 Connect an AV cable (not supplied) between the camcorder’s VIDEO OUT and AUDIO OUT connectors and your VCR’s VIDEO IN and AUDIO IN connectors.

●When a Master Edit Control-equipped JVC camcorder is used, the camcorder is capable of controlling your VCR. The Mini-plug cable is a mono 3.5 mm mini-plug to mono 3.5 mm mini-plug connector.

LOAD A CASSETTE

2 Insert the cassette to be recorded on into the recorder.

SET RECORDER’S INPUT MODE

3 Press NUMBER key “0” to set to AUX.

ACCESS MAIN MENU

SCREEN

4 Press MENU as many times as necessary.

ACCESS FUNCTION SET SCREEN

5 Press CH5° to place the arrow next to “FUNCTION SET”, then press OK.

ACCESS AUX INPUT SCREEN

6 Press CH5° to place the arrow next to “AUX INPUT”, then press OK.

SELECT INPUT

7 If you are connecting the AV cable to the AV connectors on the front of the VCR, place the arrow next to "FRONT" by pressing CH5°. If you are connecting the AV cable to the AV connectors on the back of the VCR, place the

arrow next to "REAR" by pressing CH5°.