JVC HR-J631T manual Auto Timer, Or, during on-screen timer programming

34

TIMERRECORDING(cont.)

OK MENU

6

q

CH

Auto Timer

When the Auto Timer is set to ON the timer is automatically engaged when the VCR's power is turned off and automatically disengaged when the VCR is powered back on.

	ACCESS MAIN MENU
1	SCREEN
	Press MENU as many times as necessary.
	ACCESS FUNCTION SET
2	SCREEN
	Place the arrow next to "FUNCTION SET" by pressing
	CH5°, then press OK.
	ACCESS AUTO TIMER
	SCREEN

1

4

7

K

2 3

5 6

89

0

TIMER

MENU

CH

Place the arrow next to "AUTO TIMER" by pressing

CH5°, then press OK. Now skip to step 2 of the

3 procedure below.

Or, during on-screen timer programming ...

	ACCESS AUTO TIMER
1	SCREEN
	In step 7 in the G-Code Timer Programming procedure
	(☞ pg. 29) or in step 7 in the On-Screen Timer Program-
	ming procedure (☞ pg. 31), press MENU.
2	SELECT MODE
	Place the arrow next to	AUTO TIMER
	your choice ("ON" or
		=ON
	"OFF") by pressing CH5°.
		OFF
		PRESS (5,°) TO SELECT
		PRESS (MENU) TO END
	RETURN TO NORMAL
3	SCREEN
	Press MENU as many times as necessary.

NOTE:

For safety, when AUTO TIMER is set to “OFF”, all other VCR functions are disabled while the Timer mode is engaged. To disengage the timer, press TIMER.