JVC HR-J746MS Revise Programme, Auto Timer, Check And Cancel Programmes, Screen AND/OR Display

46TIMERRECORDING(cont.)

Auto Timer

When the Auto Timer is set to ON the timer is automatically engaged when the recorder power is turned off and automati- cally disengaged when the recorder is powered back on.

	2
1	2	3
4	5	6
7	8	9
ANNUL.	0	4

CHAINE

DEBUT

FIN DATE

CONTROLE PROG.

3

MENU 1

OK

MULTI-

FONCTIONS

Check And Cancel

Programmes

	ACCESS PROGRAMME
1	SCREEN AND/OR DISPLAY
	Press CONTROLE PROG.
	● The display panel shows the programme start time.
	Pressing OK changes the display to the programme
	stop time, then the date and channel.
	● If the recorder is turned on and the TV is set to its AV
	mode, you can check program information on screen
	as well.
	● Each time you press CONTROLE PROG., the next
	programme's information appears.
	If All Information Is Correct . . .
	. . . programming is completed.
	If You Wish To Revise Data . . .
	. . . with the recorder's power turned on, go to step 2.
	If You Wish To Cancel A Program . . .
	. . . with the recorder's power turned on, press ANNUL.
	All information you input is deleted.
	REVISE PROGRAMME
2	INFORMATION
	Input the appropriate data using the DEBUT +/–, FIN +/–,
	DATE +/– and CHAINE +/– buttons on the remote control.

ACCESS MENU PRINCIPAL SCREEN

1 Press MENU twice.
	ACCESS AUTRES
2	REGLAGES SCREEN
	Press MULTI-FONCTIONS	MENU PRINCIPAL
	%Þto move the highlight
		AUTRES REGLAGES
	bar (pointer) to "AUTRES			CANAUX
		REGL. AUTO. DES
	REGLAGES", then press	REGL. MANUEL CANAUX
	OK.	REGL. DES NUMEROS GUIDE
		REGLAGE DE L'HORLOGE
		[5°] =
		[MENU] : SORTIE
	SELECT MODE
	Press MULTI-	AUTRES REGLAGES
	FONCTIONS%to select
		ENR. PROG. AUTO : M.
3 either "M." or "A.".
		O.S.D.	: M.
		B.E.S.T.	: M.
		SELECTION AV2	: AUX.
		[5°] = [5] : M./A.
		[MENU] : SORTIE
	RETURN TO NORMAL
	SCREEN
4 Press MENU.

NOTE:

For safety, when Auto timer is set to "A.", all other recorder functions are disabled while the Timer mode is engaged. To disengage the timer, press AUTO.