JVC HR-J746MS, HR-J449MS instruction manual Clock Set, Preparation

22INITIALSETTINGS(cont.)

Clock Set

Turn on the TV and select AV mode.

2

1 2 3

4 5 6

If you performed Auto Set Up (☞ pg. 14) or Auto Channel Set (☞ pg. 16) without ever having set the clock previously, the recorder’s built-in clock is also set automatically. The Auto and Manual clock setting procedures are necessary when . . .

–a power outage of more than 60 minutes occurs.

–the tuner has been set manually.

–the user desires to set the clock slightly ahead of the actual time.

–the clock was not set even after Auto Set Up or Auto Channel Set was performed.

Whether you perform Auto or Manual clock setting, you can use the convenient Just Clock function.

Just Clock

The Just Clock function provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal.

The Just Clock option appears in the Clock Set and Auto Clock Set screens, and can be set “M.” or “A.” (the default setting is “M.”). Press OK until the Just Clock setting begins blinking, then press MULTI-FONCTIONS%Þto change the setting.

IMPORTANT: If you turn off Just Clock off, the accuracy of your

7 8 9recorder’s built-in clock may be reduced, which could adversely effect timer recording.

0 4

MENU

MULTI-FONCTIONS

3

1

	Both Auto and Manual clock setting procedures begin from step 4.
	Preparation
		1	TURN THE RECORDER ON
OK			Press			.
			ACCESS MENU PRINCIPAL
		2	SCREEN
			Press MENU twice.
			ACCESS REGLAGE DE
		3	L'HORLOGE SCREEN
			Move the highlight bar (pointer) to "REGLAGE DE
			L'HORLOGE" by pressing MULTI-FONCTIONS%Þ,
			then press OK. The Clock Set screen appears.
					MENU PRINCIPAL			REGLAGE DE L'HORLOGE
				AUTRES REGLAGES			HEURE		DATE	ANNEE
				REGL. AUTO. DES CANAUX				0: 00	01 . 01	00
				REGL. MANUEL CANAUX
				REGL. DES NUMEROS GUIDE
				REGLAGE DE L'HORLOGE				HORL. AUTO: M.
								CHAINE	1
							[5]: HEURE AUTO
				[5°] =			[5°] =
				[MENU] : SORTIE			[MENU] : SORTIE