JVC HR-J746MS Basic Connections, Check Contents, Situate Recorder, Connect Recorder to TV

10

INSTALLINGYOURNEWRECORDER

Basic Connections

RF Cable (provided)

Antenna adapter (provided)

21

(no

Aerial terminal

Back of TV

21-pin SCART connector
It's essential that your video recorder be properly connected.	Mains Power
Follow these steps carefully. THESE STEPS MUST BE COMPLETED
BEFORE ANY VIDEO OPERATION CAN BE PERFORMED.	Cord

1

2

3

4

CHECK CONTENTS

Make sure the package contains all of the accessories listed in “Specifications” (☞ pg. 55).

SITUATE RECORDER

Place the recorder on a stable, horizontal surface.

CONNECT RECORDER TO TV

a– Disconnect the TV aerial cable from the TV. b– Connect the TV aerial cable to the ENTREE

ANTENNE jack on the rear panel of the recorder. c– Connect the provided RF cable between the SORTIE

ANTENNE jack on the rear panel of the recorder and the TV’s aerial terminal with the provided antenna adapter directly connected to the TV as illustrated.

d– Connect the provided SCART cable between the AV1 ENTREE/SORTIE socket on the rear panel of the recorder and the TV’s 21-pin SCART connector.

Before operating the recorder, make sure the TV is set to the VIDEO (or AV) mode.

CONNECT RECORDER TO MAINS

Plug the end of the mains power cord into a mains outlet.

D

SOR

Mains outlet

21-pin SCART Cable (provided)