31

Repeat Playback

Your video recorder can automatically play back the whole tape
20 times repeatedly.
START PLAYBACK
1
Press 4($).
ACTIVATE REPEATPLAYBACK
2
Press 4($) and hold for over 5 seconds, then release.
●The Play indicator ($) on the display panel blinks
slowly.
●The tape plays 20 times automatically, and then
stops.
STOP PLAYBACK
3
Press 5 at any time to stop playback.
NOTE:

Pressing

4

(

$

),

2

,

3

or

6

also stops Repeat Playback.

3R Picture

3R(= Resolution and Response Recovery technology) maximises
sense of resolution and sharpens image edges to make playback
picture look better focused.
ACTIVATE 3R PICTURE
1
Press 3R. The button will light.
●To turn off 3R Picture, press 3R again so that the light
goes off.
●Normally it is recommendable to keep 3R Picture ON
(with the button lit).
●Depending on the type of tape used, picture quality
may be better with 3R Picture set to off.
●If you use this recorder as the player for editing, be
sure to turn off 3R Picture before starting.
●The setting will remain effective even though you
turn on/off the recorder.

NTSC Playback

Your video recorder is equipped with NTSC circuitry that can
play back NTSC tapes.
LOAD A CASSETTE
1
Insert a cassette recorded in NTSC.
START PLAYBACK
2
Press 4($).
●Pressing SYSTEME COULEUR during NTSC playback
displays "NTSC" on the screen for about 5 seconds.
●Some TVs shrink the picture vertically and place
black bars at the top and bottom of the screen. This is
not a malfunction on the part of either the video
recorder or the TV.
●The picture may roll up and down. This can be
corrected using the V-HOLD control found on some
TVs. (This cannot be corrected if the TV does not
have a V-HOLD control.)
●The counter and tape remaining time readings will be
incorrect.
●During search, still, or frame-by-frame playback, the
picture will be distorted, and there may be a loss of
colour.
●Depending on the type of TV, the top and bottom
portions of superimposed displays may be cut off
during NTSC playback.