JVC HR-J746MS Edit From a Camcorder, SET RECORDER’S Input, Mode, Start Camcorder, Start Recorder

50

EDITING(cont.)

Edit From A Camcorder

	2
1	2	3		"0"
4	5	NUMBER
		6
7	8	9
	0		4

CHAINE

3

1

You can use a camcorder as the source player and your video recorder as the recorder.

MAKE CONNECTIONS

1 Connect the camcorder’s AUDIO/VIDEO OUT connectors to the recorder’s front panel AUDIO/VIDEO input connectors.

For HR-J746MS owners...

●When using a monaural camcorder, connect its AUDIO OUT connector to the AUDIO G input connector on your recorder.

For HR-J449MS owners...

●When using a Hi-Fi camcorder, connect its AUDIO OUT L connector to the AUDIO input connector on your recorder.

●When a Master Edit Control-equipped JVC camcorder is used, the camcorder is capable of controlling the recorder. Refer to the camcorder’s instruction manual for operating procedure.

	SET RECORDER’S INPUT
	MODE
	Press NUMBER key “0” and/or CHAINE so that “F-AU”
2 appears in place of a channel number.
3	START CAMCORDER
	Engage its Play mode.
4	START RECORDER
	Engage its Record mode.

Recorder Your recorder

q

		To rear panel TELEC.
VIDEO		connector
input	AUDIO
	input
	Audio/Video Cable	Mini-Plug Cable
	(not provided)
		(not provided)
	VIDEO OUT	(JVC camcorder
		only)

Camcorder

AUDIO OUT

IMPORTANT

Before you start editing, be sure to select the appropriate colour system by pressing SYSTEME COULEUR depending on the system of the connected recorder or camcorder. ☞ p. 51

Player

EDIT