JVC HR-J746MS, HR-J449MS S.T. Picture System, Access Autres Reglages Screen, Recording

36RECORDING(cont.)

B.E.S.T. Picture System

Turn on the TV and select the AV mode.

q

3 OK

MENU	1
-FONCTIONS
MULTI

Display Panel Indication

HR-J746MS

HR-J449MS

As the tape check progresses, the “—” marks on the display panel increase upward. Once the "BEST" indicator starts blinking, the check is complete.

The B.E.S.T. (Biconditional Equalised Signal Tracking) system checks the condition of the tape in use during recording and playback, and compensates to provide the highest-possible recording and playback pictures. The default setting for both recording and playback is “M.”.

Recording

1		LOAD A CASSETTE
		Insert a cassette with the record safety tab intact.
		● The recorder power comes on automatically.
		ACCESS MENU PRINCIPAL
		SCREEN
2 Press MENU twice.
		ACCESS AUTRES
		REGLAGES SCREEN
		Move the highlight bar	MENU PRINCIPAL
		(pointer) to "AUTRES
3 REGLAGES" by pressing			AUTRES REGLAGES		CANAUX
			REGL. AUTO. DES
		MULTI-FONCTIONS %Þ,	REGL. MANUEL CANAUX
	then press OK.		REGL. DES NUMEROS GUIDE
			REGLAGE DE L'HORLOGE
			[5°] =
			[MENU] : SORTIE
		CONFIRM B.E.S.T. STATUS
		The default setting is “M.”.	AUTRES REGLAGES
		If this is the case, go to	ENR. PROG. AUTO : M.
4 step 5. If not, press MULTI-
			O.S.D.	: M.
	FONCTIONS Þ to move		B.E.S.T.	: M.
	the highlight bar (pointer)		SELECTION AV2	: AUX.
	to “B.E.S.T.”, then press
	MULTI-FONCTIONS%to
	set to “M.”.
			[5°] = [5] : M./A.
			[MENU] : SORTIE
		RETURN TO NORMAL
		SCREEN
5 Press MENU.
6		START RECORDING
		Press and hold qand 4 on the remote, or q on the
		recorder.

●The recorder spends approximately 7 seconds assessing the condition of the tape, then begins recording.

●When the "BEST" indicator begins blinking, that means adjustment is complete.

●Pressing the recorder's q button while "BEST" is displayed does not start Instant Timer Recording (☞ pg. 41).