JVC Activate Spatializer, Spatializer HR-J746MS only, Soundtrack Selection HR-J746MS Only

34

PLAYBACK (cont.)

q

SPATIALIZER

2

1 2 3

4 5 6

7 8 9

0 4

Spatializer (HR-J746MS only)

This feature expands sound field when you play back any stereo source or view a stereo programme while recording it. *Spatializer has no effect on recording quality.

1		ACTIVATE SPATIALIZER
		Press SPATIALIZER; the current setting will be displayed
		on the screen for about 5 seconds. Pressing
		SPATIALIZER while the screen shows the display
		changes the setting.
		● To view a stereo programme such as movies or
		music, select "SPATIALIZER			" to create more
		spacious sound.
		● To view a monaural programme, select
		"SPATIALIZER[ST" which simulates a stereo effect.
	● Select "SPATIALIZER A." to turn off Spatializer if the
		sound becomes unnatural with either "SPATIALIZER
			" or "SPATIALIZER[ST" selected.
	● The SPATIALIZER button lights when either
		"SPATIALIZER		" or "SPATIALIZER[ST" is
		selected, even though the recorder power is off.
	● The setting will remain effective even though you
		turn on/off the recorder.

NOTE:

Spatializer is effective only with a stereo TV.

Soundtrack Selection (HR-J746MS Only)

Your video recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.

During Playback

Pressing CONTROLE AUDIO on the remote control changes the soundtrack being played back as follows:

TRACK					USE
Recorder's Front Panel	On-Screen Display
L + R			HI FI		For Hi-Fi stereo tapes
	L			R
L	L		HI FI		For main audio of Bilingual tapes
R			HI FI		For sub audio of Bilingual tapes
				R
NORM		NORM			For audio-dubbed tapes
L + R + NORM			HI FI		For audio-dubbed tapes
		NORM

NOTES:

●"L + R" should normally be selected. In this mode, Hi-Fi stereo tapes are played back in stereo, and the NORM track is played back automatically for tapes with only normal audio.

●For instructions on recording stereo and bilingual programmes, refer to page 40.

●"O.S.D." must be set to "M." or the on-screen displays will not appear (☞ pg. 38).