Page 24 December 4, 2001 5:14 pm
TIMER RECORDING (cont.)Express Timer Programming
If you do not know the SHOWVIEW number for the programme
you wish to record, use the following procedure to set your
recorder to timer-record the programme.
AAccess the SHOWVIEW screen.
BAccess the Programme screen.
CEnter the programme start time.
DEnter the programme stop time.
Press STOP+/– to enter the time you want recording to
●Press and hold STOP+/– to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
EEnter the programme date.
Press DATE+/– .
●The current date appears on the TV screen. The date you enter
appears in its place.
Before performing Express Timer Programming:
●Make sure that the recorder’s built-in clock is set properly.
●Insert a cassette with the safety tab in place. The recorder
will come on automatically.
●Turn on the TV and select the video channel (or AV mode).
Press START+/–. (If you’re
just starting out, “P1”
Press START+/– to enter the
time you want recording to
●Press and hold START+/– to
move in 30-minute
increments, or press and
release repeatedly to move 1
minute at a time.
HRS5950EU1-EN.book Page 24 Tuesday, December 4, 2001 5:32 PM