Filename [DR-M1EK_11Subsidiary.fm]
Masterpage:Left+
Page 104 September 4, 2003 11:44 am
SUBSIDIARY SETTINGS (cont.)
104
Clock Set
AAccess the Main Menu screen.
Press SET UP.
BAccess the “CLOCK SET” screen.
CSet the date and time.
APress rt to select “YEAR”, then press ENTER.
BPress rt to set the year, then press ENTER.
●Repeat the same procedure to set the date and time. When
you set the time, press and hold rt to change the time by 30
minutes.
●When you set the date, press and hold rt to change the date
by 15 days.
●Turn on the unit.
●Turn on the TV and select the AV mode.
●Slide the TV/CABLE/SAT/DVD switch to DVD.
Just Clock
The Just Clock function provides accurate time keeping
through automatic adjustments at regular intervals, by
reading data from a PDC signal.
The Just Clock option can be set to “ON” or “OFF” at the
Clock Set screen (the default setting is “OFF”). (墌pg.105)
IMPORTANT: If you turn off Just Clock, the accuracy of your
unit’s built-in clock may be reduced, which could adversely
effect timer recording. We recommend you to keep Just
Clock on. In cases where the clock setting data from a PDC
signal is incorrect, however, you are advised to keep Just
Clock set to “OFF”.
IMP
O
RTANT:
If you performed Auto Set Up (墌pg.21) or Preset
Download (墌pg.23), without ever having set the clock
previously, the unit’s built-in clock is also set automatically.
Perform the following steps only if—
—Auto Clock Set has not been performed correctly by Auto
Set Up or Preset Download.
OR
—you want to change Just Clock setting. (墌“Just Clock” in
the left column)
APress we
to select
“INITIAL SET UP”, then
press ENTER.
BPress we
to select
“CLOCK SET”, then press
ENTER.
DR-M1EK_11Subsidiary.fm Page 104 Thursday, September 4, 2003 11:44 AM