JVC DR-M1SLB, LPT0827-001B 105, Set Just Clock, Set the source channel position for clock data

105

D Set Just Clock.

The default setting is “OFF”.

APress rt to select “JUST CLOCK”, then press ENTER.

BPress rt to set to the desired mode, then press

ENTER.

●For the Just clock function, refer to “Just Clock” on page 104.

●If you set to “OFF”, you can disregard the next step as you won’t be able to receive regular clock adjustments.

E Set the source channel position for clock data.

The unit is preset to receive clock setting and adjustment data from channel position 1.

APress rt to select “TV PROGRAMME”, then press

ENTER.

BPress rt to set the channel position to the number representing the station transmitting clock setting data, then press ENTER.

F Start the clock operation.

Press SET UP.

NOTES:

●Just Clock (when set to “ON”) adjusts the unit’s built-in clock every hour, except for 23:00, 0:00, 1:00 and 2:00.

●Just Clock is not effective when:

—the unit’s power is on.

—the unit is in the Timer mode.

—a difference of more than 3 minutes exists between the built-in clock’s time and the actual time.

—the unit is in the Automatic Satellite Programme Recording mode. ( pg. 65)

—the unit is in the Power Save mode. ( pg. 95)

—“L-2 SELECT” is set to “SAT VIDEO” or “SAT S-VIDEO”. ( pg. 85)

●If Just Clock is set to “ON”, the unit’s clock is automatically adjusted at the start/end of Summer Time.

●Just Clock may not function properly depending on the reception condition.