JVC LPT0827-001B, DR-M1SLB manual Access the Output/Input Set screen, IN/OUT connector

84 EDITING (cont.)

Output/Input Set

●Turn on the TV and select the AV mode.

●Slide the TV/CABLE/SAT/DVD switch to DVD.

L-1 Output and L-1 Input Setting (L-1 OUTPUT and L-1 INPUT)

The L-1 IN/OUT connector accepts and delivers either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). Set “L-1 OUTPUT” and “L-1 INPUT” to the appropriate mode depending on the type of appliance connected to the unit’s L-1 IN/OUT connector.

A Access the Main Menu screen.

Press SET UP.

B Access the Output/Input Set screen.

APress w e to move the arrow to“FUNCTION SET

UP”, then press ENTER. B Press w e to move the

arrow to “VIDEO IN/ OUT”, then press ENTER.

C Select the output or input mode for the L-1

IN/OUT connector.

APress rt to move the

arrow to “L-1 OUTPUT” or “L-1 INPUT”, then press ENTER.

B Press rt to select the appropriate setting, then press ENTER.

(The boldface settings in the table below indicate the settings at your purchase.)

8L-1 OUTPUT

SCART VIDEO: If a connected appliance’s input is compatible only with regular video signals, set to “SCART VIDEO”.

SCART S-VIDEO: If a connected appliance’s input is compatible with Y/C signals, set to “SCART S-VIDEO”. You can obtain high-quality picture. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

SCART RGB: If a connected appliance’s input is compatible with RGB signals, set to “SCART RGB”. You can obtain a high-quality RGB picture.

COMPONENT: If a connected appliance’s input is

compatible with Y/PB/PR signals, set to “COMPONENT”. You can

obtain a high-quality Y/PB/PR picture.

8L-1 INPUT

VIDEO: If a connected appliance’s output is compatible only with regular video signals, set to “VIDEO”.

S-VIDEO: If a connected appliance’s output is compatible with Y/C signals, set to “S-VIDEO”. You can obtain a high- quality picture. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

D Return to the normal screen.

Press SET UP.

NOTES:

●If “L-1 OUTPUT” is set to “SCART S-VIDEO”, “SCART RGB” or “COMPONENT”, it is not possible to set “L-1 INPUT” to “S-VIDEO”.

●If “L-2 SELECT” is set to “DECODER”, it is not possible to set “L-1 INPUT” to “S-VIDEO”.

●If “L-2 SELECT” is set to “DECODER”, it is only possible to set “L-1 OUTPUT” to “SCART VIDEO”.

●Component video signals are not output from the L-1 IN/OUT connector.

●When Progressive scan mode is engaged, it is not possible to select the setting of “L-1 OUTPUT”. ( pg. 108)