Confirm the overlapping programmes | JVC LPT0827-001B, DR-M1SLB

64TIMER RECORDING (cont.)

When programmes overlap each other

If “PROGRAM OVERLAPPED” appears, you have another programme overlapping the programme you have just made. Confirm with the arrow on “OK”, then press PROG/CHECK. Programme Check screen appears and conflicting programmes will be highlighted in pink.

Example: Programme 3 (you have just made) and

Programme 4 overlap each other.

A Confirm the overlapping programmes.

Overlapping programmes appear on the TV screen.

NOTE:

If you do not mind this overlap, press PROG/CHECK to finish the timer programme setting. The programme with the lower programme number will be recorded and the other one will not be recorded correctly. If no changes are made for approximately 1 minute, the unit will return to the normal screen.

B Select the desired programme to be cancelled or changed.

Press rt.

To cancel the programme

Press &.

● “THE TIMER PROGRAMMING SETTING WAS CANCELLED” appears on the TV screen for about 5 seconds, then the normal screen resumes.

To change the programme setting

Press ENTER.

C Change the programme setting.

● Refer to steps D – J in “Manual Timer Programming” ( pg. 58).

D Check if the conflict has been settled.

Press PROG/CHECK.

● Programme check screen appears.

E Engage the unit’s timer mode.

● Refer to step F in “Check, cancel and change programmes” ( pg. 63).

NOTE:

When any overlaps remain after deletion and modification of programmes, Programme Check screen remains showing the conflicting programmes. In such a case, repeat the procedure above until the conflict is solved.

Image 64

JVC LPT0827-001B, DR-M1SLB Confirm the overlapping programmes, Select the desired programme to be cancelled or changed

Contents

DR-M1SLB Safety Precautions Moisture Condensation Some Do’s And Don’ts On The Safe Use Of Equipment Above ALL Contents About Discs Recordable/playable discsDVD-RAM Discs DVD-R/RW Discs Discs for Playback Only Unplayable DiscsRegion Number Audio CD Recording Medium and Format File Structure of DiscsDVD-RAM DVD-R JPEG/MP3 Disc CD-R/RW/ROM DVD Video MarksMarks related to video Placing a Disc Care and Handling of Discs Front View Rear View Digital Audio OUT COAXIAL/OPTICAL Disc Type/Status Indicator Front Display Panel Simulated Surround Effect Indicator 3D pg ON-SCREEN Display Disc Display Remote Control How To Use Check Contents Connect the unit to a TV Install the unitConnect the unit to mains After the connection is completed, perform Auto Set Up on Back of unit 8To connect to TV’s component video input connectors Connect the unit to TV Auto Set Up Perform Auto Set UpTurn on the unit Enter Initial Settings After Auto Set Up is completed, perform Monitor Set on Perform Preset Download After Preset Download is completed, perform Monitor Set onPress Enter Press rt to move Arrow to T-V Link and press Enter Information Just Clock Access the Main Menu screen Access the Video IN/OUT screenComplete the setting Monitor Set Access the Language SET screen Press w e to move Arrow to DVD SET UP, then press OKLanguage Select the desired language Language Code List Installing Satellite Controller Install a Satellite ControllerAttach the Satellite Controller Make connections Setting satellite receiver’s brand and channel Access the SAT/GUIDE PR screenSelect the satellite receiver’s channel for testing Turn on the satellite receiver Unit Auto Standby Direct Rec TV Auto Power OnCheck the result of the test Basic Playback Load a discStart playback Pause playback Locating a desired scene using the DVD menu Access the DVD menuTop menu Disc menu Locating the start point of the item or skip the item High-Speed SearchSlow Motion Skip Search Resume Function Memorise a resume pointResume playback Mark positions Angle Selection Switching Time IndicationSubtitle Selection Locating a desired scene using Access the PBC menuWhen you can’t switch the audio channel of a Audio Channel Selection Menu of a Video CD with PBC Image figure of DVD-RAM disc Live Memory PlaybackSuperimpose display Overview of Live Memory Playback Recording screenRecording stops Live Memory Playback screen Checking Display during Live Memory Playback Example of bar meter display Functions Available only when pausedLive Check Start One Touch Replay function Start Live Memory PlaybackTo watch a programme previously recorded while recording Using Play Set Up Menu How to Access Play Set Up MenuContents of Play Set Up Menu during playback Before using Play Set Up Menu Select the menu item Access Play Set Up MenuSelect the option Select the repeat mode Repeat PlaybackLocate the start point Locate the end point and start A-B Repeat Playback Random Playback Programme PlaybackSelect the tracks in the desired order While stopped Select the desired item Locating the beginning of a desired selectionSpecify the number of the selected item To cancel the simulated surround effect Enter the timeUse number keys 1-9, 0 to enter the time, then press Press Enter to clear 3D-ON from the screen Select the switching interval of the slide show Adjusting the picture qualitySetting the progressive mode Access the DVD SET UP screen Enter your passwordParental Lock Select the desired level To change the settings Access the password screenChange the level Change the country code Country/Area Code List for Parental Lock Playback Operations Set the recording speed Start recordingPause recording Stop recording Instant Timer Recording ITR Engage the ITR modeSwitch the TV to TV mode Set the recording duration Free Rate Function Receiving Stereo and Bilingual ProgrammesType of Broadcast Being Received Access the Video Plus+ screen Before performing the Video Plus+ Timer ProgrammingEnter the PlusCode number Check the programme data Access the confirmation screen Complete timer programmingEngage the unit’s timer mode Set the following recording options as required Manual Timer Programming Access Programme Check screenAccess the programme screen Enter the recording date Refer to step E in Video Plus+ Timer Programming pg PDC RecordingEnter the recording stop time Enter the channel position On-Disc Timer Programming Before performing On-Disc Timer Programming Set DAILY/WEEKLY option Load the disc How discs are overwritten Disengage the timer mode Complete timer correctionChange a programme Programme’s information on the front display panel Select the desired programme to be cancelled or changed Change the programme settingConfirm the overlapping programmes Check if the conflict has been settled Select the L-2 Select mode Engage the Automatic Satellite Programme Recording modeREC Mode Programme Recording Icons Arrow Guidance for operations H Operational commandsIcons and their meanings About editing of programmes About registration of informationLimitations of registration Select the programmes Access the Index screenPress ENTER. Or simply press 4. The playback starts Access the modify screen Modify IndexSelect a programme Register new index Modify Category Modify Programme NameProtect title Access the delete screen Delete programmeDelete unwanted part of the programme Confirm the deletion Access the Play List screen Create Play ListCreate a play list Confirm the play list Access the Editing screen Add scenes to a play listMove scenes Confirm the addition Confirm the move Repeat steps C E Play back play list Delete play listModify Programme Title Select the play lists Scan for Programme from library Access the library screenSort the information Register disc Delete informationRegister the disc Confirm the registration Playback with MP3/JPEG Navigation Display the item Select the groupSelect the item Select the items in the desired order DV Dubbing Performing dubbing without using the DV Dubbing controller Prepare the unit for dubbingStart dubbing Stop dubbing Set the unit’s input mode Set the input mode of recording deck Engage the Play mode of the source playerEngage the Record mode of the recording deck Start the source player Access the Output/Input Set screen IN/OUT connector1 Output 1 Input Input Setting F-1 Input Select the input mode for the L-2 Decoder connectorSelect the input mode for the Video Video connector 2 Select Select the input mode Place a disc and load an MDFor the unit For the digital audio device Remote 1/2/3/4 Code Switching Set the TV brand code TV Multi-Brand Remote ControlOperate the TV Satellite Receiver Multi-Brand Remote Control Slide the TV/CABLE/SAT/DVD switch to CABLE/SATSet the satellite receiver brand code Operate the satellite receiver Connecting To a Satellite Receiver Make connections Mode Set Access the Recording SET screenDVD SET UP Function SET UP Audio Output Digital Audio OUTAnalog Audio OUT Range Control XP Mode REC Audio Recording SETSave AS Library Audio REC Power Save Display SETSuperimpose Grey Back Others Auto TimerOFF on Video Plus+ System Setup Guide Program Number SetGuide Program Number Enter the Guide Program number Tuner Set Auto Channel SetPerform Auto Channel Set View the Confirmation screen Select the channel position Manual Channel SetPress w e to select Manual CH SET, then press Delete a Channel 100Change Station Channel Position Set Stations a 101Set Stations B 102 TV Station And ID List 103 TV Station Channel Number Guide Access the Clock SET screen Press w e to select Initial SET UP, then press EnterClock Set 104 105 Set Just ClockSet the source channel position for clock data Start the clock operation Format a disc 106Format a DVD-RAM disc Format a DVD-RW disc Cancel the finalisation of a DVD-RWdisc Finalise a disc107 Finalise a DVD-R/RW disc Scan Mode Set Set the scan mode108 Press Progressive Scan for 2 or more seconds 109 General 110 Recording 111 ON-SCREEN Messages 112 ON-SCREEN Messages 113 DTSJpeg Mpeg TUNER/TIMER Accessories114 General 115 Auto Channel SetDelete programme Disc menu Discs for Playback Only Subtitle Selection Time Search Top menu DR-M1SLB