PLAYBACK OPERATIONS

31

Basic Playback

Turn on the unit.

Turn on the TV and select the AV mode.

Slide the TV/CABLE/SAT/DVD switch to DVD.

ATTENTION:

It takes approximately 30 seconds to read a disc depending on the type and condition of the disc since this unit is multi-disc compatible (DVD-RAM, DVD-RW, DVD-R). It may even take several minutes when a disc is dirty, scratched or warped.

It may take a few seconds to start playback. This is not a malfunction.

Forward/reverse high-speed search and other operations cannot be performed while playback is stopped.

To play back an MP3/JPEG disc, see “Playback with MP3/JPEG Navigation” ( pg. 78).

A Load a disc.

APress x to open the disc tray.

BPlace the disc on the disc tray.

For details, refer to “Placing a Disc” ( pg. 10).

C Press x to close the disc tray.

Pressing 4 also closes the disc tray.

Playback begins automatically if an auto-playback DVD disc is loaded.

B Start playback.

Press 4.

If you load a DVD disc whose region code does not match the

unit, “REGION CODE ERROR” appears on the TV screen. For details, refer to “Region Number” ( pg. 7).

If “The DISC can’t play now!” appears on the TV screen, refer to “Parental Lock” ( pg. 49).

With Video CD discs with PBC control or some DVD discs, the menu display may appear on the TV screen after starting playback. In this case, select an item which you want to play back from the menu. Otherwise, the playback cannot go

forward. Refer to “Locating a desired scene using the menu of a Video CD with PBC” ( pg. 36) or “Locating a desired scene using the DVD menu” ( pg. 32).

The Library Database DVD Navi also enables you to search and select the desired programmes. ( pg. 66)

C Pause playback.

Press 9.

To resume normal playback, press 4.

D Stop playback.

Press 8.

When a recordable disc is played, playback stops and a programme received with the unit’s tuner resumes on the TV screen.

When a playback-only disc is played, playback stops and the still image at the time you press 8 remains on the TV screen. Pressing 8 again resumes a programme received with the unit’s tuner.

If x is pressed during playback, playback stops, then the disc tray opens.

NOTES:

When the Library Database DVD Navi screen appears, choose

a thumbnail image of the desired programme on the TV screen, then press 4 or ENTER. ( pg. 68)

When 4 is pressed for the first time after purchase or a power cut, menu screen appears. ( pg. 104)

Page 31
Image 31
JVC DR-M1SLB, LPT0827-001B manual Basic Playback, Load a disc, Start playback, Pause playback, Stop playback